Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

calls not going to coverage, fast busy

Status
Not open for further replies.

AVAYAPro

Vendor
Sep 2, 2008
215
US
I have the following extension provisioned. On all incoming calls from external sources via the ISDN-PRI, the caller will hear silence for 3 seconds and a fast busy:

Extension: 1674 BCC: 0
Type: virtual Security Code: TN: 1
Coverage Path 1: 30 COR: 3
Name: MM TEST EXT Coverage Path 2: COS: 3
Map-to Station:

Time of Day Lock Table:
Personalized Ringing Pattern: 1




Survivable COR: internal
Survivable Trunk Dest? y

list trace station 1674 Page 1

LIST TRACE

time data

13:14:28 Calling party trunk-group 5 member 24 cid 0x20f
13:14:28 Calling Number & Name xxxxxxxxxx NO-CPName
13:14:28 call-forwarding 1674
13:14:28 term station 1674 cid 0x20f
13:14:38 dial 1072411699 route:AAR
13:14:38 term trunk-group 99 cid 0x20f
13:14:38 call-forwarding 1072411699
13:14:38 route-pattern 99 preference 1 cid 0x20f
13:14:38 seize trunk-group 99 member 2 cid 0x20f
13:14:38 Calling Number & Name xxxxxxxxxx NO-CPName
13:14:38 Proceed trunk-group 99 member 2 cid 0x20f
13:14:38 active trunk-group 99 member 2 cid 0x20f
13:14:38 denial event 1220: Recovery on timer expiry D1=0x830005 D2=0x266
13:14:38 idle trunk-group 5 member 24 cid 0x20f

Anybody have any ideas on what I can look for that might explain this? All other stations of COR 3 are covering normally and calls from internal extensions go to coverage normally.

Thanks and regards...






ACS - IP Office Implement
ACA - IP Telephony Implement
CCNA - Cisco Certified Network Associate
MCP - Microsoft Certified Professional

 
Check you Public-unknown for extension range 16xx. Make sure you are sending that extension number over to MM.
 
That trunk is actually utilizing unk-pvt and the 1xxx extension range is in that table. On another note, other extensions in the 1600 range are covering normally

ACS - IP Office Implement
ACA - IP Telephony Implement
CCNA - Cisco Certified Network Associate
MCP - Microsoft Certified Professional

 
I had the same denial event on calls landing on MM, but only when they came in on some of my toll free numbers. Avaya ended up changing the send callers name to "n" on the TG form.
Not sure if that helps or not.
 
No joy, same result.

ACS - IP Office Implement
ACA - IP Telephony Implement
CCNA - Cisco Certified Network Associate
MCP - Microsoft Certified Professional

 
That denial event is related to Q.931 messages/timers according to the documentation here: (See the cause value 102 section)

We are having an issue with certain phones failing to register correctly due to Q.931 messages not being received in a timely manner, we have isolated it to a particular model of Alcatel network switch, although we still haven't identified a fix yet.

May be completely unrelated to your issue but thought it was worth mentioning.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top