CallPilot Seizes Lines

[telcamtek]

Hi,

I setup Outbound Extension transfer with pool A on a mailbox
not connected to a phone, and it works when sending call to a cellphone. But it will not let the lines go. Any thoughts?
Supervised disconnect is setup on line card for all four lines in pool A.

 

[BombOne]

are you saying that after the call is done, the lines stay in use? or during the call? this setup will use 2 lines until the callers hang up.

 

[PERRYPJ]

try changing it to no supy

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[exsmogger]

Supervision must be turned on for this feature to work. Try turning off supervision and then release from programming. Give the trunks a minute to reconfigure as they will go out-of-service for a minute. Then go back into programming and turn supervision back on. Again, give the trunks a minute to reconfigure.

Brian Cox
BC Telecom Services

http://www.linkedin.com/in/briancox1952

 

[telcamtek]

Thank you all for your replies.

Oddly enough Disconnect Supervision is not available in
different parts of our city yet with Bell Canada.

We're looking at VoIP service with a local cable company today.

Merry Christmas

Have a blessed new year!