Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Callpilot Reporter 5.0 Installed on VMWare
- Thread starter Lupillo2
- Start date
Splic3d
Vendor
- Dec 28, 2012
- 499
If you are trying to put it on the Call Pilot server, don't. It should go on the PC or server with Application Builder. That is we usually have a PC setup in the Comm rooms to administer CP,App Builder, ProComm to access the switch, CCM and ect...
If its not working, get a bigger hammer!
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
If its not working, get a bigger hammer!
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
bdmcdonald99
Technical User
We are running App builder and Reporter and MyCallpilot on a virtual server with zero issues......
It's a phone system, NOT a clock!
It's a phone system, NOT a clock!
- Thread starter
- #4
bdmcdonald99
Technical User
Sure, you may have to edit your hosts file to tell the server where the CallPilot is.
It's a phone system, NOT a clock!
It's a phone system, NOT a clock!
- Status
Similar threads
- Locked
- Question
