201I...The short and sweet of it... When trying to access a mailbox, callpilot does not recognize dtmf...it continues to play it's login greeting. Installed the software, added SU10 for both the server and manager. I reinstalled the software twice, to no avail. Any help would be greatly appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Callpilot does not recognize dtmf after upgrade to 5.0
- Thread starter MikeyT2
- Start date
MikyT2 - after spending about 5 hours trying to sort this one out with you and TJ - here is the fix for your notes.
Always add the dep list on the pbx right after joining the sec domain.
patch 30731 was our winner.
this patch relates to having dtrs on virtual card 0 and we had no choice because mfc ports are on 15. The special instructions for this patch for rls 7.5 is to add patch, out dtr's, build new dtrs and then reboot mgcs.
Tia
Always add the dep list on the pbx right after joining the sec domain.
patch 30731 was our winner.
this patch relates to having dtrs on virtual card 0 and we had no choice because mfc ports are on 15. The special instructions for this patch for rls 7.5 is to add patch, out dtr's, build new dtrs and then reboot mgcs.
Tia
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question