I have an issue with Callpilot Application Builder version 5.00.41.167. Last week i made a change to one of my applications and i went to undo the change earlier this week only to find out that i could no longer open the application. So i decided to open other applications which some would open and some would not. After much research i checked my File Transfer folder and found nothing inside. One thing i did notice which was interesting is that all folders under D:\Nortel\cust\cust1\nm_abd\uprog were associated with my applications. so as i opened each folder associated with a application (application ID is folder), i noticed that the applications i COULD open only had one folder with two files inside so for instance D:\Nortel\cust\cust1\nm_abd\uprog\1001 would have a folder inside named D:\Nortel\cust\cust1\nm_abd\uprog\1001\0 and inside this folder where two files. 1001.ed and 1001.run. Then i noticed the folder with the application number i COULD NOT open had more then i folder in then. example
D:\Nortel\cust\cust1\nm_abd\uprog\1023\16
D:\Nortel\cust\cust1\nm_abd\uprog\1023\18
and in the 16 folder there were 3 files 1023.ed 1023.rll 1023.run. the 18 folder was blank. Each application i COULD NOT open and its corresponding folder had multiple files.
Has anyone ran into this issue and been able to fix it?
D:\Nortel\cust\cust1\nm_abd\uprog\1023\16
D:\Nortel\cust\cust1\nm_abd\uprog\1023\18
and in the 16 folder there were 3 files 1023.ed 1023.rll 1023.run. the 18 folder was blank. Each application i COULD NOT open and its corresponding folder had multiple files.
Has anyone ran into this issue and been able to fix it?