I have a phone number in Iceland that some people here can call and others get a fast busy. Tried this number from different phone types and the only difference that I can see is the bcc field on my station is different than the others. I can get through. I know if anyone picks up a phone with the same COR it should behave the exact same way, but it's not. I'm baffled. any ideas and if this bcc field means anything on the station level. I can't change the value of it either.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Calling Out
- Thread starter btrain08
- Start date
BCC= bearer capability class.
It should be 0 for stations. What type of phone are you using? How is it configured? Do you have a data module? The BCC should be set at the route pattern level not station. Try removing your station and re-adding it by duplicating a working station. Hope this helps.
Matt--Telecom Engineer, Network Operations Center
CCNA
ACA-Voice Management
ACE-IP Telephony
Converged+ Certified
Linux+ Certified
It should be 0 for stations. What type of phone are you using? How is it configured? Do you have a data module? The BCC should be set at the route pattern level not station. Try removing your station and re-adding it by duplicating a working station. Hope this helps.
Matt--Telecom Engineer, Network Operations Center
CCNA
ACA-Voice Management
ACE-IP Telephony
Converged+ Certified
Linux+ Certified
- Status
Similar threads
- Locked
- Question