Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calling Line ID not displayed if call is forwarded from another

Status
Not open for further replies.

bluerigsby

Technical User
Oct 8, 2003
126
GB
If a call to a local DDI is missed, it rolls to the attendant by default. However the attendant cannot see the originating callers ID only the phone that forwarded the call.

Is there a setting in the customer data block that extends caller ID under these conditions?
 
You might need to confirm that the incoming caller did send their number in. It's best to see if you can capture the CDR data.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =
 
I have the same problem. It was working until some unknow person changed my programming. I installed this system over 15 years ago. I know the CDR is capturing the data. Is it in CDB or RDB? Can't seem to remember where this is programmed.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top