calling DID internally and externally

[sonomazr2]

I hope this doesn't get too long to explain.
We have now 2 did ranges 123.1234 and 124.1234. My IDC table is in this form - idgt xxxx ext xxx.
When an external caller calls either of the did range numbers, the correct extension is rung. if an internal caller calls on-net (7110)124.1234 it doesn't work. if they call (7110)123.1234, they get 124.1234, that is of course, if range 123 and 124 don't have the same last 4 digits (which is the case, none of the last numbers are the same)
I hope somebody can make sense of my explanation -
if they call on-net they have to dial 123.1234 when their number is 124.1234

 

[McGruff753]

Looks like you will need to change your system to 5 digit dialing.

 

[nortic]

print your idc table and ld 87 prt hloc and lsc's

sounds like hloc or an lsc is your old exchange

 

[sonomazr2]

according to 553-3001-311
ld 87
prt
feat (I picked cdp as the response)
type (I picked lsc,dsc, and tsc as the response)
enter at the prompt
none (this is what was returned)

what am I doing wrong here?

 

[nortic]

you are not doing any thing wrong.

and internally you say you can't dial 124.1234

can you dial 1234?

are you using tie routes, if so check to make sure that the
rdb is not somehow inserting 123
and make sure whatever switch you the tie lines are connected to are not inserting 123.
now that you have 2 nxx(exchange codes) the other switch willneed those ranges and insert the approriate codes.

i can't tell with out printouts rdbsld 21 , idc ld 49
and net ld 21 and esn ld86

 

[phonejack99]

Why not apply the same IDC tables that you use for your external routes on these point to points?

 

[sonomazr2]

nortic,

correct, i have to dial 123.1234 to get 124.1234

don't know about 1234,(never thought of checking that)
we use 3 digit ext codes, if that helps.
will check monday morn, and try to get the prt's you're asking about.
can you clearify what list you want?

ld 21 prt rdbs ?
ld 49 prt idc ?
ld 21 net ?
ld 86 esn ?

thanks

 

[nortic]

SONOMARZ
LD 22
REQ ISS

LD 49
REQ PRT
TYPE IDC
DCNO (RETURN)
(JUST A FEW AS AN EXAMPLE) FROM WHAT YOU SAID YOUR RECIEVING 4 DIGITS FROM DID ROUTE AND THIS IS TRANSLATING TO 3 DIGITS

LD 21
REQ PRT
TYPE RDB
CUST 0
ROUT (YOUR DID AND TIE LINE ROUTES)
IN DID ROUTE NDIG=?,IDC-?,DCNO=?
IN TIE LINE ROUTE OABS=?,INST =?,IDC=?,DCNO=?

LD 21
REQ PRT
TYPE NET
CUST 0

LD 22
REQ PRT
TYPE DNB
CUST 0
DN (ANY WORKING EXT THAT THIS AFFECTS)
(SOMEONE FROM ANOTHER SITE DIALS WHAT EXACTLY TO GET TO THIS SET?)

LD 86
REQ PRT
CUST 0
TYPE ESN
(ONLY NEED DOWN TO BUT NOT ICLUDING TOD SCHEDULES)
AC2=?
THIS WILL HELP

 

[sonomazr2]

LD 22
REQ ISS

ver. 1411 rel.21 issue 7+

LD 49
REQ PRT
TYPE IDC
DCNO (RETURN)
(JUST A FEW AS AN EXAMPLE) FROM WHAT YOU SAID YOUR
RECIEVING 4 DIGITS FROM DID ROUTE AND THIS IS TRANSLATING TO 3 DIGITS


4digits 3 digits
LD 21
REQ PRT
TYPE RDB
CUST 0
ROUT (YOUR DID AND TIE LINE ROUTES)
IN DID ROUTE NDIG=?,IDC-?,DCNO=?
IN TIE LINE ROUTE OABS=?,INST =?,IDC=?,DCNO=?

AS FOLLOWS

TYPE RDB
CUST 00
DMOD
ROUT 3
TKTP TIE
ESN NO
CNVT NO
SAT NO
RCLS EXT
DTRK NO
PTYP ATT
AUTO NO
DNIS NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 7103
TARG
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
SIGO STD
STYP SDAT
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ETH
FEDC ETH
CPDC NO
DLTN YES
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR NO
MUS NO
MANO NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
AUTH NO
TTBL 0
OHTD NO
PLEV 2
ALRM NO
ART 0
SGRP 0

7103, 7104, 7105 are tie and all the same

TYPE RDB
CUST 00
DMOD
ROUT 6
TKTP DID
SAT NO
RCLS EXT
DTRK NO
PTYP ACO
AUTO NO
DNIS NO
ICOG ICT
STEP
ACOD 7106
TARG
OABS
INST
IDC YES
DCNO 1 *
NDNO 1
DEXT NO
DNAM NO
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ETH
FEDC ETH
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR NO
MUS YES
MRT 40
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TTBL 0
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0

TYPE RDB
CUST 00
DMOD
ROUT 10
TKTP DID
SAT NO
RCLS EXT
DTRK YES
DGTP DTI
PTYP DCO
AUTO NO
DNIS NO
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP
ACOD 7110
TARG
OABS
INST
IDC YES
DCNO 1 *
NDNO 1
DEXT NO
DNAM NO
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ORG
FEDC ORG
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR YES
INC YES
LAST NO
TTA NO
QREC NO
OAL YES
AIA NO
OAN YES
OPD YES
NATL YES
MUS YES
MRT 40
MR NO
EQAR NO
FRL 0 0
FRL 1 1
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TTBL 0
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0

CUST 00
DMOD
ROUT 11
TKTP DID
SAT NO
RCLS EXT
DTRK YES
DGTP DTI
PTYP DCO
AUTO NO
DNIS NO
ICOG ICT
STEP
ACOD 7111
TARG
OABS
INST
IDC YES
DCNO 1 *
NDNO 1
DEXT NO
DNAM NO
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ORG
FEDC ORG
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR NO
MUS NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TTBL 0
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0

TYPE RDB
CUST 00
DMOD
ROUT 14
TKTP DID
SAT NO
RCLS EXT
DTRK YES
DGTP DTI
PTYP DCO
AUTO NO
DNIS NO
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP
ACOD 7114
TARG
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ORG
FEDC ORG
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR NO
MUS NO
MR NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
TTBL 0
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0

LD 21
REQ PRT
TYPE NET
CUST 0

opt - rtd ac2 ispn-no vnr-no nit-8 fopt-14

LD 22
REQ PRT
TYPE DNB
CUST 0
DN (ANY WORKING EXT THAT THIS AFFECTS)
(SOMEONE FROM ANOTHER SITE DIALS WHAT EXACTLY TO GET TO THIS SET?)

2 did ranges 123.xxx and 124.xxx
ext 316 did 123.1234 onnet callers have to dial 124.1234
sl1 tn 12-15 key00 H MARP DES

LD 86
REQ PRT
CUST 0
TYPE ESN
(ONLY NEED DOWN TO BUT NOT ICLUDING TOD SCHEDULES)
AC2=?
THIS WILL HELP

MXLC 0
MXSD 128
MXIX 127
MXDM 128
MXRL 128
MXFC 64
MXFS 64
MXSC 200
NCDP 7
AC1 9
AC2 7199

HOPE THIS HELPS

 

[nortic]

is 14 a new did route? it has no idc entry?
if this is for a new block of dids would't you need an idc table for it to translate?
there is no modifications of digits in bound on tie lines
are the onnet calls comming across tie lines?

 

[sonomazr2]

is 14 a new did route? it has no idc entry?

whatever is there, has been there for awhile, I haven't added anything

if this is for a new block of dids would't you need an idc table for it to translate?
there is no modifications of digits in bound on tie lines
are the onnet calls comming across tie lines?

I'm going to quess, yes. We are connected to the corp office with a T1, with 6 channels allocated to voice.

 

[nortic]

YOU CAN USE CALL TRACE (LD 80)

HAVE SOMEONE PLACE AN ONNET CALL TO AN EXT HAVING THE PROBLEM
AND THEN TRACE THE CALL TO SEE WHAT ROUTE IS USED,

TRAC TN(ie 4 0 02 0)NOTICE THE "DIAL DN" FIELD

THIS SHOULD TELL YOU IF THE CALL IS COMMING ACROSS TIE LINES
IF IT IS (ORIGINATING TN)
THE SYSTEM ON THE OTHER END OF TIE LINES WOULD BE WHERE THE MODIFICATION NEEDS TO BE MADE. 123 VS 124
HOPE THIS HELPS,

FOR YOU INFO, YOU CAND LIST TRUNK MEMBERS IN LD 21 TO SEE IF YOU ARE USING ALL YOUR ROUTES

REQ LTM
CUST 0
ROUT (RETURN)

DON'T KNOW WHAT ELSE I CAN DO