Hi,
Our signaling server underwent an improper shutdown, and since then the Callers list and Redial list are not accessible. Is it possible to remove these options from the phone display?
You can activate the Personal Directory application like Redial , Callers etc .Using the CS1000 Element Manager (resides on the Signaling Server) there is a field that needs to be filled in with the ELAN IP address of the primary Signaling Server under IP Telephony -> Personal Directories -> Server -> Server IP Address should be set to the ELAN IP address of the primary Signaling Server.
You should log in to your cs1000 call server and in
LD 117
.REG UCM SYS
.KEY IN THE IP OF SIGNALLING SERVER
.KEY IN THE ADMIN USER NAMES AND PASSWORD (you use for web browser of signalling server)
. YOU ARE REGISTERED SUCCESSFULLY...
open your web browser to access sig server.
Now you will be able to access the element manager
Did you receive a ping reply from the system. Also check your LAN IP setting of your PC. Your PC must have IP in the range of your system TLAN IP. If this is OK then you should give a Reboot to your SS
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.