Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

caller list on "-0" in BP 128/250 1

Status
Not open for further replies.

nitram11

Technical User
Nov 21, 2005
55
DE
Hello, all

i want to get all incoming extern calls on head number 12345 -"0" landing on one extension with possibility of caller list; , but not operator; because (i think), caller list cannot be activated for operator extension in BP 128/250; ; i have try , to use a dbc 4223 acitivated as alternate operator position/number - but same effect; no caller list appears; is thers a workarround ?
Thanks for all hints.
 
When you route the -0 via ddi table to the extension you will get a caller list
but not when you route the -0 via reroute position to the extension.
 
Hello, Xs

so i hope, trunk route programming -0 will not be influenced (never necesary for me, to deal with ddi,) now i will try

thanks a lot and greetings from germany, martin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top