Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Caller Id
- Thread starter jazaya
- Start date
No i live in the cold north.
i've read it in a CNA release document for
BC11 (it was SP8).
Check in the bottom:
BC11 Service Package - 8
Contents
•
1 Revision information
2 Prerequisites
3 Included CNA files
3.1 General implementation instruction
3.2 Special implementation instruction
3.2.1 Service Pack 4
3.2.2 Service Pack 5
3.2.3 Service Pack 6
3.2.4 Service Pack 7
3.2.5 Service Pack 8
4 PROM and FW
4.1 New FW
4.2 Updated PROM files
4.3 Updated FW
5 Applications
6 HW
6.1 Required HW
6.2 New HW
6.3 HW updated for other reasons
7 SW correction Information
7.1 Included patches
7.2 Included patches in old service packs
8 Documents
9 References
1 Revision information
The first revision is A.
2 Prerequisites
Source system ASB 501 04 R8 with a software level at SP3 or higher.
To find correct hardware revision use USS rdb 83.
3 Included CNA files
To download the CNA file, click on the link for the appropriate Application System.
Application System Internal reference
Standard
109 22-ASB 501 04/01-177
United Kingdom
109 22-ASB 501 04/02-177
Denmark
109 22-ASB 501 04/03-177
Saudi Arabia
109 22-ASB 501 04/04-177
Sweden
109 22-ASB 501 04/05-177
Australia
109 22-ASB 501 04/06-177
Norway
109 22-ASB 501 04/07-177
Finland
109 22-ASB 501 04/09-177
Austria
109 22-ASB 501 04/10-177
The Netherlands
109 22-ASB 501 04/11-177
Brazil
109 22-ASB 501 04/12-177
Italy
109 22-ASB 501 04/15-177
Spain
109 22-ASB 501 04/16-177
Belgium
109 22-ASB 501 04/17-177
Ireland
109 22-ASB 501 04/18-177
Malaysia
109 22-ASB 501 04/19-177
Germany
109 22-ASB 501 04/21-177
Hong Kong µ-law
109 22-ASB 501 04/22-177
China
109 22-ASB 501 04/23-177
Mexico
109 22-ASB 501 04/24-177
Singapore
109 22-ASB 501 04/25-177
New Zealand
109 22-ASB 501 04/29-177
North America
109 22-ASB 501 04/30-177
Switzerland
109 22-ASB 501 04/31-177
Indonesia
109 22-ASB 501 04/32-177
Export
109 22-ASB 501 04/39-177
France
109 22-ASB 501 04/40-177
South Africa
109 22-ASB 501 04/43-177
Hong Kong a-law
109 22-ASB 501 04/45-177
Korea, Republic of 109 22-ASB 501 04/47-177
3.1 General implementation instruction
The CNA files are used for automatic update by the SAM toolbox ESD (Ericsson Software Distributor) application (For more information see ESD manual). Following steps should be done:
1. Copy all .cfg files, which are placed in subdirectories .. bc11xx.SP8 esd helpfile.*, to the Distribution files (.CFG, .INI) path defined in Options Settings.
2. Set up the job in the ESD by choosing menu item Job list>New >Job list file and follow the Job Wizard.
a. ESD tool can be used if the customer's exchange data are entered into the customer database which is administrated by Customer Database Administrator.
b. Select file bc11sp3tosp8xx.cfg for upgrading from SP3 to SP8, bc11sp4tosp8xx.cfg for upgrading from SP4 to SP8 or bc11sp5tosp8xx.cfg for upgrading from SP5 to SP8 or bc11sp6tosp8xx.cfg for upgrading from SP6 to SP8 or bc11sp7tosp8xx.cfg for upgrading from SP7 to SP8(xx stands for Application system version e.g. st for standard system).
c. Select Continue without firmware switching. Firmware switching shall be done after system upgrade.
3. After Job Wizard is finished, choose menu item Update > Start. ESD will now upgrade the system automatically.
4. Check the result of the system upgrade with MD Inventory Tool. Reference .mcc is placed in subdirectories .. bc11xx.SP8 esd mcc refsp8xx.mcc. (For more information see MD Inventory Tool Manual)
3.2 Special implementation instruction
3.2.1 Service Pack 4
None
3.2.2 Service Pack 5
This instruction is only valid for Application system Standard, United Kingdom, Denmark, Sweden, Norway, Finland, Australia, Austria, Brazil, Belgium, Germany, New Zealand, Switzerland and Saudi Arabia.
Program units RHH revision R4D is part of relevant CNA package and is placed in the directory .. bc11xx.SP8 Manual actions.Manual PU upgrading procedure must be done according to the following steps:
1. Transfer RHH program unit to HDU. (Path .../SES/DR/ADD/P for RHH.P and .../SES/DR/ADD/D for RHH.D For more details see Operational directions/File Administration 1/154 31-CNA 103 329 Chapter 6.5 Create directory and Chapter 6.15 File transfer from a V.24-port into the system / MD Disk Tool manual concerning file transfer).
2. Remove all RA software data.
3. Remove old RHH program unit from the PABX (For more details see Operational directions/Loading - 4/154 31-AND 102 02 - Chapter 6.1 Removing program unit.).
4. Add new RHH program unit (For more details see Operational directions/Loading - 4/154 31-AND 102 02 - Chapter 6.2 Adding program unit.).
5. Execute general implementation procedure described in Chapter 3.1.
6. Reinitiate all RA software data.
7. Make a system dump.
3.2.3 Service Pack 6
This instruction is only valid for Application system Netherlands.
Program units RHH revision R4D is part of relevant CNA package and is placed in the directory .. bc11xx.SP8 Manual actions.Manual PU upgrading procedure must be done according to the following steps:
1. Transfer RHH program unit to HDU. (Path .../SES/DR/ADD/P for RHH.P and .../SES/DR/ADD/D for RHH.D For more details see Operational directions/File Administration 1/154 31-CNA 103 329 Chapter 6.5 Create directory and Chapter 6.15 File transfer from a V.24-port into the system / MD Disk Tool manual concerning file transfer).
2. Remove all RA software data.
3. Remove old RHH program unit from the PABX (For more details see Operational directions/Loading - 4/154 31-AND 102 02 - Chapter 6.1 Removing program unit.).
4. Add new RHH program unit (For more details see Operational directions/Loading - 4/154 31-AND 102 02 - Chapter 6.2 Adding program unit.).
5. Execute general implementation procedure described in Chapter 3.1.
6. Reinitiate all RA software data.
7. Make a system dump.
3.2.4 Service Pack 7
None
3.2.5 Service Pack 8
This instruction is only valid for Application system Spain.
Program units RHH revision R4D is part of relevant CNA package and is placed in the directory .. bc11xx.SP8 Manual actions.Manual PU upgrading procedure must be done according to the following steps:
1. Transfer RHH program unit to HDU. (Path .../SES/DR/ADD/P for RHH.P and .../SES/DR/ADD/D for RHH.D For more details see Operational directions/File Administration 1/154 31-CNA 103 329 Chapter 6.5 Create directory and Chapter 6.15 File transfer from a V.24-port into the system / MD Disk Tool manual concerning file transfer).
2. Remove all RA software data.
3. Remove old RHH program unit from the PABX (For more details see Operational directions/Loading - 4/154 31-AND 102 02 - Chapter 6.1 Removing program unit.).
4. Add new RHH program unit (For more details see Operational directions/Loading - 4/154 31-AND 102 02 - Chapter 6.2 Adding program unit.).
5. Execute general implementation procedure described in Chapter 3.1.
6. Reinitiate all RA software data.
7. Make a system dump.
4 PROM and FW
To download the FW, click on the link of the appropriate FW. FW with no link can be ordered via an add-on order.
4.1 New FW
Table: 4-1. Service Package - 5
Product name Internal reference To R-state
Span Conv. Firmw. CAA 112 2691 R2A
Table: 4-2. Service Package - 6
Product name Internal reference To R-state
None
Table: 4-3. Service Package - 7
Product name Internal reference To R-state
Italian lang. Module CAA 158 0011/11 R1A
OIPLF Polish CAA 158 0014/18 R1B
Table: 4-4. Service Package - 8
Product name Internal reference To R-state Short Description
ELF32 CAA 158 0016 R2A
Used with new 8 channel ELU32 ( ROF 137 5428/1 )
4.2 Updated PROM files
To download the PROM files, click on the link of the appropriate PROM.
To order PROMs from factory please order via orderdesk by an add-on order specifying RYS number with R-state.
Table: 4-5. Service Package - 5
Product name Internal reference From R-state To R-state
TLF80-DP
RYS 102 320 R6A R7A
Table: 4-6. Service Package - 6
Product name Internal reference From R-state To R-state
None
Table: 4-7. Service Package - 7
Product name Internal reference From R-state To R-state
None
Table: 4-8. Service Package - 8
Product name Internal reference From R-state To R-state
ELF28 RYS 102 669/1 R1B R1C
ELF29 RYS 102 662/1 R7A R8A
ELF29/16 RYS 102 662/2 R2A R3A
4.3 Updated FW
Firmware switchover can cause traffic disturbance so it should be done during the period of low traffic. Firmware files are loaded in system during automatic upgrade procedure and stored under /SES/DR/FW directory on HDU (note: only FW which can be later loaded from by the means of I/O commands). In CNA package FW files are placed in subdirectory ../bc11xx.SP8/esd/Firmware.
Firmware switchover for the equipment should be done according the instructions in document Operational directions, configuration of board level software, downloading - 6/15431-CNA103 256.
Note: In NIF R10A no conversion from small to capital letters are performed. Files that shall be handled by the ASB 501 04 must be typed in capital letters.
Table: 4-9. Service Package - 4
Product name Internal reference From R-state To R-state
OIPRF (PRI2)
CAA 158 0012 R4J R4K
OIPCF (PRI2)
CAA 158 0013 R4J R4K
Load module DT368 1/CXCNB 210 01 R2L R2M
Load module DT570 1/CXCNB 230 01 R1E R2A
Load module TH688 CXC 109 106 R4B R4C
ELF32
CAA 158 0009 R7A R8A
Table: 4-10. Service Package -5
Product name Internal reference From R-state To R-state
OIPRF
CAA 158 0012 R4K R4V
OIPCF
CAA 158 0013 R4K R4V
OIPBF
CAA 158 0015 R2E R2F
LCPF
CAA 112 523 R6A R7A 1
SPU2_VCF
CAA 158 0006 R2A R3A
NIF
CAA 158 0001 R9A R10A
ELF31
CAA 158 0010 R4A R5A
ELF32
CAA 158 0009 R8A R8B
Note: 1. Shall be ordered via an add-on order specifying RYS 102 320 R7A.
Table: 4-11. Service Package - 6
Product name Internal reference From R-state To R-state
OIPRF
CAA 158 0012 R4V R5B
OIPCF
CAA 158 0013 R4V R5B
OIPBF
CAA 158 0015 R2F R3A
OIPLF, English CAA 158 0014/00 R1B R2B
OIPLF, English-Nordic CAA 158 0014/101 R1B R2A
Load Module BS370
CXCNB 101 108/6 R3C R3D
Table: 4-12. Service Package - 7
Product name Internal reference From R-state To R-state
OIPRF (PRI2)
CAA 158 0012 R5B R5F
OIPCF
CAA 158 0013 R5B R5F
OIPBF
CAA 158 0015 R3A R3B
OIPLF Swedish CAA 158 0014/01 R1A R2A
OIPLF German CAA 158 0014/02 R1A R2B
OIPLF Spanish CAA 158 0014/03 R1A R2A
OIPLF French CAA 158 0014/04 R1A R2A
OIPLF Finnish CAA 158 0014/05 R1A R2A
OIPLF Danish CAA 158 0014/06 R1B R2A
OIPLF Norwegian CAA 158 0014/07 R1A R2A
OIPLF Italian CAA 158 0014/08 R1A R2A
OIPLF Portuguese-Brazil CAA 158 0014/15 R1A R2A
OIPLF Dutch CAA 158 0014/16 R1A R2A
Dual Mode Phone software
CXC 109 106 R4C R4D
VCF
CAA 158 0006 R3A R4A
Table: 4-13. Service Package - 8
Product name Internal reference From R-state To R-state Short Description
OIPRF
CAA 158 0012 R5F R5G
Lock up of the telephone
OIPCF
CAA 158 0013 R5F R5G
Configuration file is made to point out the correct version of the application and the bootrom file in the DBC 413 01 IP telephone
OIPLF Finnish CAA 158 0014/05 R2A R2B
Minor language corrections
OIPLF Danish CAA 158 0014/06 R2A R2B
Minor language corrections
ELF31
CAA 158 0010 R5A R6A
Default TPUIs being assigned at wrong occasions
VMF
CAA 158 0003 R5A R8A
Corrupted voice mailboxes during high traffic
NIF
CAA 158 0001 R10A R12A
Cannot log on to port 1 V.24
DT570 Cordless Phone software
1/CXCNB 230 01 R2A R2C
Not possible to pick up a call when ring level switched off
5 Applications
To download the Application SW, click on the link of the appropriate SW.
Table: 5-1. Service Package - 8
Product name Internal reference To R-state Short Description
SAM toolbox SP2
LXA 103 26 R3/3
General fault corrections, see PRI
LVP
LXA 103 30 R1C
FTP problems in LVP -FR1030
6 HW
6.1 Required HW
The HW stated here is only the HW for mandatory update, i.e strongly recommended by Ericsson in order to run the ASB 501 04 system.
To view or download the Product Revision Information, click on the link of the appropriate Product name.
Product name Internal reference From R-state To R-state
None
6.2 New HW
The HW stated here are HW that replaces an existing HW. Ordering tool have been updated accordingly.
Table: 6-2. Service Package - 8
Product name Internal reference To R-state Short Description
ELU32 ROF 137 5428/1 R1A Replaces existing 2 channel ELU32
6.3 HW updated for other reasons
The HW stated here is not mandatory to update. It is to be introduced where the problem described in the PRI, under reason for revision occurs.
To download the Product Revision Information, click on the link of the appropriate Product name.
Table: 6-3. Service Package - 4
Product name Internal reference From R-state To R-state
ELU29
ROF 137 5339/12 R6E R7F
ELU29
ROF 137 5339/13 R6F R7G
ELU29
ROF 137 5339/14 R7E R8E
ELU29
ROF 137 5339/15 R6E R7F
Table: 6-4. Service Package - 5
Product name Internal reference From R-state To R-state
TLU80
ROF 137 5406/1 R8A R9A
LPU5
ROF 131 4602 /3 R8A R9A 1
LPU5
ROF 131 4602 /3 R8B R9B 1
LPU5
ROF 131 4602 /3 R8C R9C
Note: 1. Only for field upgrading
Table: 6-5. Service Package - 6
Product name Internal reference From R-state To R-state
RG5DC
ROF 137 5350/2 R1D R2A
SPU2 ROF 137 5416/1 R7A R7B
Telephone DBVA 204 2705/208 R1B R2A
Telephone DBVA 204 2711/08 R1A R2A
Telephone DBVA 404 4041/08 R1B R2A
Telephone DBVA 404 4053/08 R1A R2A
Telephone DBVA 404 4053/208 R1A R2A
Telephone DBVA 404 4076/08 R1B R2A
Telephone DBVA 404 4081/08 R2B R3A
Key Panel DBY 409 01/01008 R2A R2B
TAU-D ZAT 505 120/1 R6A R7A
Printed Board for TAU-D ROA 309 113/1 R6A R7A
Table: 6-6. Service Package - 7
Product name Internal reference From R-state To R-state
RG5DC
ROF 137 5350/2 R2A R3A
RG5DC ROF 137 5350/2 R1A R1A/A 1
RG5DC ROF 137 5350/2 R1B R1B/A 1
HDU7 ROF 137 5398/2 R1B R1C
GJUG5
ROF 137 5389/2 R4A R5A/A
TAU-D Adapter ZAT 505 120/1 R2A R2A/1 1
TAU-D Adapter ZAT 505 120/1 R3A R3A/1 1
TAU-D Adapter ZAT 505 120/1 R3B R3B/1 1
TAU-D Adapter ZAT 505 120/1 R3C R3C/1 1
TAU-D Adapter ZAT 505 120/1 R4A R4A/1 1
TAU-D Adapter ZAT 505 120/1 R5A R5A/1 1
TAU-D Printed board ROA 309 113/1 R3A R3A/1 1
TAU-D Printed board ROA 309 113/1 R3B R3B/1 1
TAU-D Printed board ROA 309 113/1 R3C R3C/1 1
TAU-D Printed board ROA 309 113/1 R4A R4A/1 1
TAU-D Printed board ROA 309 113/1 R5A R5A/1 1
Note: 1. for field or repair only.
Table: 6-7. Service Package - 8
Product name Internal reference From R-state To R-state Short Description
ELU29 ROF 137 5339/11 See PRI
Interruption of ringing cadence might occur when connecting certain telephone sets to the board
ELU29 ROF 137 5339/12 See PRI
Interruption of ringing cadence might occur when connecting certain telephone sets to the board
ELU29 ROF 137 5339/13 See PRI
Interruption of ringing cadence might occur when connecting certain telephone sets to the board
ELU29 ROF 137 5339/14 See PRI
Interruption of ringing cadence might occur when connecting certain telephone sets to the board
ELU29 ROF 137 5339/15 See PRI
Interruption of ringing cadence might occur when connecting certain telephone sets to the board
ELU29 ROF 137 5339/16 See PRI
Interruption of ringing cadence might occur when connecting certain telephone sets to the board
ELU28 ROF 137 5334/3 R2A R3A
The new R-state is required for the introduction of firmware download to new terminals
DIALOG 32xx DBC 210, DBC 211, DBC 212, DBC 213 See PRI-1
See PRI-2
Solution for "cracking sound" problem
7 SW correction Information
7.1 Included patches
The patches are included in each AS CNA file.
Patch slogan list for Service Pack 8
7.2 Included patches in old service packs
Slogan list for Service Pack 4
Slogan list for Service Pack 5
Slogan list for Service Pack 6
Slogan list for Service Pack 7
8 Documents
There is an updated ALEX. Download the new version from the documentation area of MD110 BC11/BC/HA
New documents included in ALEX are listed below.
Table: 8-1. Service Package - 8
Document name Document number Revision Short description
None
9 References
Listed documents are for internal reference only.
109 22-APD 101 02-694 Uen A1 Battery
109 22-APD 101 02-766 Uen A1 End user products
109 22-APD 101 02-771 Uen A Designation Card Kit
109 22-APD 101 02-774 Uen A New ELU32
109 22-APD 101 02-782 Uen A User Guides and Quick Reference Guides - R8
109 22-APD 101 02-784 Uen A Fault correction of DBC 413 01
109 22-APD 101 02-785 Uen A1 WEB Message Package (CD ROM)
109 22-APD 101 02-787 Uen A1 HW Corrections
109 22-APD 101 02-788 Uen A Document corrections
109 22-APD 101 02-789 Uen A SW corrections
109 22-APD 101 02-796 Uen A Sales object
109 22-APD 101 02-797 Uen A Correction of DT4x0 and DT570
109 22-APD 101 02-798 Uen A Recompiled LSP and SCP
109 22-APD 101 02-801 Uen A A-number displayed on analogue telephones
109 22-APD 101 02-802 Uen A1 Phased out hardware
109 22-APD 101 04-122 Uen A LVP
109 22-APD 101 04-124 Uen A SAM Toolbox SP2
//soaplover
i've read it in a CNA release document for
BC11 (it was SP8).
Check in the bottom:
BC11 Service Package - 8
Contents
•
1 Revision information
2 Prerequisites
3 Included CNA files
3.1 General implementation instruction
3.2 Special implementation instruction
3.2.1 Service Pack 4
3.2.2 Service Pack 5
3.2.3 Service Pack 6
3.2.4 Service Pack 7
3.2.5 Service Pack 8
4 PROM and FW
4.1 New FW
4.2 Updated PROM files
4.3 Updated FW
5 Applications
6 HW
6.1 Required HW
6.2 New HW
6.3 HW updated for other reasons
7 SW correction Information
7.1 Included patches
7.2 Included patches in old service packs
8 Documents
9 References
1 Revision information
The first revision is A.
2 Prerequisites
Source system ASB 501 04 R8 with a software level at SP3 or higher.
To find correct hardware revision use USS rdb 83.
3 Included CNA files
To download the CNA file, click on the link for the appropriate Application System.
Application System Internal reference
Standard
109 22-ASB 501 04/01-177
United Kingdom
109 22-ASB 501 04/02-177
Denmark
109 22-ASB 501 04/03-177
Saudi Arabia
109 22-ASB 501 04/04-177
Sweden
109 22-ASB 501 04/05-177
Australia
109 22-ASB 501 04/06-177
Norway
109 22-ASB 501 04/07-177
Finland
109 22-ASB 501 04/09-177
Austria
109 22-ASB 501 04/10-177
The Netherlands
109 22-ASB 501 04/11-177
Brazil
109 22-ASB 501 04/12-177
Italy
109 22-ASB 501 04/15-177
Spain
109 22-ASB 501 04/16-177
Belgium
109 22-ASB 501 04/17-177
Ireland
109 22-ASB 501 04/18-177
Malaysia
109 22-ASB 501 04/19-177
Germany
109 22-ASB 501 04/21-177
Hong Kong µ-law
109 22-ASB 501 04/22-177
China
109 22-ASB 501 04/23-177
Mexico
109 22-ASB 501 04/24-177
Singapore
109 22-ASB 501 04/25-177
New Zealand
109 22-ASB 501 04/29-177
North America
109 22-ASB 501 04/30-177
Switzerland
109 22-ASB 501 04/31-177
Indonesia
109 22-ASB 501 04/32-177
Export
109 22-ASB 501 04/39-177
France
109 22-ASB 501 04/40-177
South Africa
109 22-ASB 501 04/43-177
Hong Kong a-law
109 22-ASB 501 04/45-177
Korea, Republic of 109 22-ASB 501 04/47-177
3.1 General implementation instruction
The CNA files are used for automatic update by the SAM toolbox ESD (Ericsson Software Distributor) application (For more information see ESD manual). Following steps should be done:
1. Copy all .cfg files, which are placed in subdirectories .. bc11xx.SP8 esd helpfile.*, to the Distribution files (.CFG, .INI) path defined in Options Settings.
2. Set up the job in the ESD by choosing menu item Job list>New >Job list file and follow the Job Wizard.
a. ESD tool can be used if the customer's exchange data are entered into the customer database which is administrated by Customer Database Administrator.
b. Select file bc11sp3tosp8xx.cfg for upgrading from SP3 to SP8, bc11sp4tosp8xx.cfg for upgrading from SP4 to SP8 or bc11sp5tosp8xx.cfg for upgrading from SP5 to SP8 or bc11sp6tosp8xx.cfg for upgrading from SP6 to SP8 or bc11sp7tosp8xx.cfg for upgrading from SP7 to SP8(xx stands for Application system version e.g. st for standard system).
c. Select Continue without firmware switching. Firmware switching shall be done after system upgrade.
3. After Job Wizard is finished, choose menu item Update > Start. ESD will now upgrade the system automatically.
4. Check the result of the system upgrade with MD Inventory Tool. Reference .mcc is placed in subdirectories .. bc11xx.SP8 esd mcc refsp8xx.mcc. (For more information see MD Inventory Tool Manual)
3.2 Special implementation instruction
3.2.1 Service Pack 4
None
3.2.2 Service Pack 5
This instruction is only valid for Application system Standard, United Kingdom, Denmark, Sweden, Norway, Finland, Australia, Austria, Brazil, Belgium, Germany, New Zealand, Switzerland and Saudi Arabia.
Program units RHH revision R4D is part of relevant CNA package and is placed in the directory .. bc11xx.SP8 Manual actions.Manual PU upgrading procedure must be done according to the following steps:
1. Transfer RHH program unit to HDU. (Path .../SES/DR/ADD/P for RHH.P and .../SES/DR/ADD/D for RHH.D For more details see Operational directions/File Administration 1/154 31-CNA 103 329 Chapter 6.5 Create directory and Chapter 6.15 File transfer from a V.24-port into the system / MD Disk Tool manual concerning file transfer).
2. Remove all RA software data.
3. Remove old RHH program unit from the PABX (For more details see Operational directions/Loading - 4/154 31-AND 102 02 - Chapter 6.1 Removing program unit.).
4. Add new RHH program unit (For more details see Operational directions/Loading - 4/154 31-AND 102 02 - Chapter 6.2 Adding program unit.).
5. Execute general implementation procedure described in Chapter 3.1.
6. Reinitiate all RA software data.
7. Make a system dump.
3.2.3 Service Pack 6
This instruction is only valid for Application system Netherlands.
Program units RHH revision R4D is part of relevant CNA package and is placed in the directory .. bc11xx.SP8 Manual actions.Manual PU upgrading procedure must be done according to the following steps:
1. Transfer RHH program unit to HDU. (Path .../SES/DR/ADD/P for RHH.P and .../SES/DR/ADD/D for RHH.D For more details see Operational directions/File Administration 1/154 31-CNA 103 329 Chapter 6.5 Create directory and Chapter 6.15 File transfer from a V.24-port into the system / MD Disk Tool manual concerning file transfer).
2. Remove all RA software data.
3. Remove old RHH program unit from the PABX (For more details see Operational directions/Loading - 4/154 31-AND 102 02 - Chapter 6.1 Removing program unit.).
4. Add new RHH program unit (For more details see Operational directions/Loading - 4/154 31-AND 102 02 - Chapter 6.2 Adding program unit.).
5. Execute general implementation procedure described in Chapter 3.1.
6. Reinitiate all RA software data.
7. Make a system dump.
3.2.4 Service Pack 7
None
3.2.5 Service Pack 8
This instruction is only valid for Application system Spain.
Program units RHH revision R4D is part of relevant CNA package and is placed in the directory .. bc11xx.SP8 Manual actions.Manual PU upgrading procedure must be done according to the following steps:
1. Transfer RHH program unit to HDU. (Path .../SES/DR/ADD/P for RHH.P and .../SES/DR/ADD/D for RHH.D For more details see Operational directions/File Administration 1/154 31-CNA 103 329 Chapter 6.5 Create directory and Chapter 6.15 File transfer from a V.24-port into the system / MD Disk Tool manual concerning file transfer).
2. Remove all RA software data.
3. Remove old RHH program unit from the PABX (For more details see Operational directions/Loading - 4/154 31-AND 102 02 - Chapter 6.1 Removing program unit.).
4. Add new RHH program unit (For more details see Operational directions/Loading - 4/154 31-AND 102 02 - Chapter 6.2 Adding program unit.).
5. Execute general implementation procedure described in Chapter 3.1.
6. Reinitiate all RA software data.
7. Make a system dump.
4 PROM and FW
To download the FW, click on the link of the appropriate FW. FW with no link can be ordered via an add-on order.
4.1 New FW
Table: 4-1. Service Package - 5
Product name Internal reference To R-state
Span Conv. Firmw. CAA 112 2691 R2A
Table: 4-2. Service Package - 6
Product name Internal reference To R-state
None
Table: 4-3. Service Package - 7
Product name Internal reference To R-state
Italian lang. Module CAA 158 0011/11 R1A
OIPLF Polish CAA 158 0014/18 R1B
Table: 4-4. Service Package - 8
Product name Internal reference To R-state Short Description
ELF32 CAA 158 0016 R2A
Used with new 8 channel ELU32 ( ROF 137 5428/1 )
4.2 Updated PROM files
To download the PROM files, click on the link of the appropriate PROM.
To order PROMs from factory please order via orderdesk by an add-on order specifying RYS number with R-state.
Table: 4-5. Service Package - 5
Product name Internal reference From R-state To R-state
TLF80-DP
RYS 102 320 R6A R7A
Table: 4-6. Service Package - 6
Product name Internal reference From R-state To R-state
None
Table: 4-7. Service Package - 7
Product name Internal reference From R-state To R-state
None
Table: 4-8. Service Package - 8
Product name Internal reference From R-state To R-state
ELF28 RYS 102 669/1 R1B R1C
ELF29 RYS 102 662/1 R7A R8A
ELF29/16 RYS 102 662/2 R2A R3A
4.3 Updated FW
Firmware switchover can cause traffic disturbance so it should be done during the period of low traffic. Firmware files are loaded in system during automatic upgrade procedure and stored under /SES/DR/FW directory on HDU (note: only FW which can be later loaded from by the means of I/O commands). In CNA package FW files are placed in subdirectory ../bc11xx.SP8/esd/Firmware.
Firmware switchover for the equipment should be done according the instructions in document Operational directions, configuration of board level software, downloading - 6/15431-CNA103 256.
Note: In NIF R10A no conversion from small to capital letters are performed. Files that shall be handled by the ASB 501 04 must be typed in capital letters.
Table: 4-9. Service Package - 4
Product name Internal reference From R-state To R-state
OIPRF (PRI2)
CAA 158 0012 R4J R4K
OIPCF (PRI2)
CAA 158 0013 R4J R4K
Load module DT368 1/CXCNB 210 01 R2L R2M
Load module DT570 1/CXCNB 230 01 R1E R2A
Load module TH688 CXC 109 106 R4B R4C
ELF32
CAA 158 0009 R7A R8A
Table: 4-10. Service Package -5
Product name Internal reference From R-state To R-state
OIPRF
CAA 158 0012 R4K R4V
OIPCF
CAA 158 0013 R4K R4V
OIPBF
CAA 158 0015 R2E R2F
LCPF
CAA 112 523 R6A R7A 1
SPU2_VCF
CAA 158 0006 R2A R3A
NIF
CAA 158 0001 R9A R10A
ELF31
CAA 158 0010 R4A R5A
ELF32
CAA 158 0009 R8A R8B
Note: 1. Shall be ordered via an add-on order specifying RYS 102 320 R7A.
Table: 4-11. Service Package - 6
Product name Internal reference From R-state To R-state
OIPRF
CAA 158 0012 R4V R5B
OIPCF
CAA 158 0013 R4V R5B
OIPBF
CAA 158 0015 R2F R3A
OIPLF, English CAA 158 0014/00 R1B R2B
OIPLF, English-Nordic CAA 158 0014/101 R1B R2A
Load Module BS370
CXCNB 101 108/6 R3C R3D
Table: 4-12. Service Package - 7
Product name Internal reference From R-state To R-state
OIPRF (PRI2)
CAA 158 0012 R5B R5F
OIPCF
CAA 158 0013 R5B R5F
OIPBF
CAA 158 0015 R3A R3B
OIPLF Swedish CAA 158 0014/01 R1A R2A
OIPLF German CAA 158 0014/02 R1A R2B
OIPLF Spanish CAA 158 0014/03 R1A R2A
OIPLF French CAA 158 0014/04 R1A R2A
OIPLF Finnish CAA 158 0014/05 R1A R2A
OIPLF Danish CAA 158 0014/06 R1B R2A
OIPLF Norwegian CAA 158 0014/07 R1A R2A
OIPLF Italian CAA 158 0014/08 R1A R2A
OIPLF Portuguese-Brazil CAA 158 0014/15 R1A R2A
OIPLF Dutch CAA 158 0014/16 R1A R2A
Dual Mode Phone software
CXC 109 106 R4C R4D
VCF
CAA 158 0006 R3A R4A
Table: 4-13. Service Package - 8
Product name Internal reference From R-state To R-state Short Description
OIPRF
CAA 158 0012 R5F R5G
Lock up of the telephone
OIPCF
CAA 158 0013 R5F R5G
Configuration file is made to point out the correct version of the application and the bootrom file in the DBC 413 01 IP telephone
OIPLF Finnish CAA 158 0014/05 R2A R2B
Minor language corrections
OIPLF Danish CAA 158 0014/06 R2A R2B
Minor language corrections
ELF31
CAA 158 0010 R5A R6A
Default TPUIs being assigned at wrong occasions
VMF
CAA 158 0003 R5A R8A
Corrupted voice mailboxes during high traffic
NIF
CAA 158 0001 R10A R12A
Cannot log on to port 1 V.24
DT570 Cordless Phone software
1/CXCNB 230 01 R2A R2C
Not possible to pick up a call when ring level switched off
5 Applications
To download the Application SW, click on the link of the appropriate SW.
Table: 5-1. Service Package - 8
Product name Internal reference To R-state Short Description
SAM toolbox SP2
LXA 103 26 R3/3
General fault corrections, see PRI
LVP
LXA 103 30 R1C
FTP problems in LVP -FR1030
6 HW
6.1 Required HW
The HW stated here is only the HW for mandatory update, i.e strongly recommended by Ericsson in order to run the ASB 501 04 system.
To view or download the Product Revision Information, click on the link of the appropriate Product name.
Product name Internal reference From R-state To R-state
None
6.2 New HW
The HW stated here are HW that replaces an existing HW. Ordering tool have been updated accordingly.
Table: 6-2. Service Package - 8
Product name Internal reference To R-state Short Description
ELU32 ROF 137 5428/1 R1A Replaces existing 2 channel ELU32
6.3 HW updated for other reasons
The HW stated here is not mandatory to update. It is to be introduced where the problem described in the PRI, under reason for revision occurs.
To download the Product Revision Information, click on the link of the appropriate Product name.
Table: 6-3. Service Package - 4
Product name Internal reference From R-state To R-state
ELU29
ROF 137 5339/12 R6E R7F
ELU29
ROF 137 5339/13 R6F R7G
ELU29
ROF 137 5339/14 R7E R8E
ELU29
ROF 137 5339/15 R6E R7F
Table: 6-4. Service Package - 5
Product name Internal reference From R-state To R-state
TLU80
ROF 137 5406/1 R8A R9A
LPU5
ROF 131 4602 /3 R8A R9A 1
LPU5
ROF 131 4602 /3 R8B R9B 1
LPU5
ROF 131 4602 /3 R8C R9C
Note: 1. Only for field upgrading
Table: 6-5. Service Package - 6
Product name Internal reference From R-state To R-state
RG5DC
ROF 137 5350/2 R1D R2A
SPU2 ROF 137 5416/1 R7A R7B
Telephone DBVA 204 2705/208 R1B R2A
Telephone DBVA 204 2711/08 R1A R2A
Telephone DBVA 404 4041/08 R1B R2A
Telephone DBVA 404 4053/08 R1A R2A
Telephone DBVA 404 4053/208 R1A R2A
Telephone DBVA 404 4076/08 R1B R2A
Telephone DBVA 404 4081/08 R2B R3A
Key Panel DBY 409 01/01008 R2A R2B
TAU-D ZAT 505 120/1 R6A R7A
Printed Board for TAU-D ROA 309 113/1 R6A R7A
Table: 6-6. Service Package - 7
Product name Internal reference From R-state To R-state
RG5DC
ROF 137 5350/2 R2A R3A
RG5DC ROF 137 5350/2 R1A R1A/A 1
RG5DC ROF 137 5350/2 R1B R1B/A 1
HDU7 ROF 137 5398/2 R1B R1C
GJUG5
ROF 137 5389/2 R4A R5A/A
TAU-D Adapter ZAT 505 120/1 R2A R2A/1 1
TAU-D Adapter ZAT 505 120/1 R3A R3A/1 1
TAU-D Adapter ZAT 505 120/1 R3B R3B/1 1
TAU-D Adapter ZAT 505 120/1 R3C R3C/1 1
TAU-D Adapter ZAT 505 120/1 R4A R4A/1 1
TAU-D Adapter ZAT 505 120/1 R5A R5A/1 1
TAU-D Printed board ROA 309 113/1 R3A R3A/1 1
TAU-D Printed board ROA 309 113/1 R3B R3B/1 1
TAU-D Printed board ROA 309 113/1 R3C R3C/1 1
TAU-D Printed board ROA 309 113/1 R4A R4A/1 1
TAU-D Printed board ROA 309 113/1 R5A R5A/1 1
Note: 1. for field or repair only.
Table: 6-7. Service Package - 8
Product name Internal reference From R-state To R-state Short Description
ELU29 ROF 137 5339/11 See PRI
Interruption of ringing cadence might occur when connecting certain telephone sets to the board
ELU29 ROF 137 5339/12 See PRI
Interruption of ringing cadence might occur when connecting certain telephone sets to the board
ELU29 ROF 137 5339/13 See PRI
Interruption of ringing cadence might occur when connecting certain telephone sets to the board
ELU29 ROF 137 5339/14 See PRI
Interruption of ringing cadence might occur when connecting certain telephone sets to the board
ELU29 ROF 137 5339/15 See PRI
Interruption of ringing cadence might occur when connecting certain telephone sets to the board
ELU29 ROF 137 5339/16 See PRI
Interruption of ringing cadence might occur when connecting certain telephone sets to the board
ELU28 ROF 137 5334/3 R2A R3A
The new R-state is required for the introduction of firmware download to new terminals
DIALOG 32xx DBC 210, DBC 211, DBC 212, DBC 213 See PRI-1
See PRI-2
Solution for "cracking sound" problem
7 SW correction Information
7.1 Included patches
The patches are included in each AS CNA file.
Patch slogan list for Service Pack 8
7.2 Included patches in old service packs
Slogan list for Service Pack 4
Slogan list for Service Pack 5
Slogan list for Service Pack 6
Slogan list for Service Pack 7
8 Documents
There is an updated ALEX. Download the new version from the documentation area of MD110 BC11/BC/HA
New documents included in ALEX are listed below.
Table: 8-1. Service Package - 8
Document name Document number Revision Short description
None
9 References
Listed documents are for internal reference only.
109 22-APD 101 02-694 Uen A1 Battery
109 22-APD 101 02-766 Uen A1 End user products
109 22-APD 101 02-771 Uen A Designation Card Kit
109 22-APD 101 02-774 Uen A New ELU32
109 22-APD 101 02-782 Uen A User Guides and Quick Reference Guides - R8
109 22-APD 101 02-784 Uen A Fault correction of DBC 413 01
109 22-APD 101 02-785 Uen A1 WEB Message Package (CD ROM)
109 22-APD 101 02-787 Uen A1 HW Corrections
109 22-APD 101 02-788 Uen A Document corrections
109 22-APD 101 02-789 Uen A SW corrections
109 22-APD 101 02-796 Uen A Sales object
109 22-APD 101 02-797 Uen A Correction of DT4x0 and DT570
109 22-APD 101 02-798 Uen A Recompiled LSP and SCP
109 22-APD 101 02-801 Uen A A-number displayed on analogue telephones
109 22-APD 101 02-802 Uen A1 Phased out hardware
109 22-APD 101 04-122 Uen A LVP
109 22-APD 101 04-124 Uen A SAM Toolbox SP2
//soaplover
- Thread starter
- #5
Hi Soaplover and thanks for the Info.
FCPLI has a FAQ page with this regard,but it is funny tyhat he has not replied with anything useful as yet.
Have to be patient I suppose!
Hope u get as many as soap as you love to get!
Regards
Experience it, there is no substitute.
RemoveThisJazayeri@kiasagroup.com
FCPLI has a FAQ page with this regard,but it is funny tyhat he has not replied with anything useful as yet.
Have to be patient I suppose!
Hope u get as many as soap as you love to get!
Regards
Experience it, there is no substitute.
RemoveThisJazayeri@kiasagroup.com
Hi FCPLI and soaplover,
Does ur replies mean MD110 BC 9 can not have CLI for analogue extensions, as far as FCPLI's FAQ I think its possible can we get some further help on that please.
In BC 11 does it have to be thru an OMR doesnt the China version has CLI functionality.
My customer wants MD110 with CLI what do u suggest guys.
Customer has BC 9 and wants more most likely it be BC 11 now and he wants CLI on both how can we help.
Please advice.
Gallian
Does ur replies mean MD110 BC 9 can not have CLI for analogue extensions, as far as FCPLI's FAQ I think its possible can we get some further help on that please.
In BC 11 does it have to be thru an OMR doesnt the China version has CLI functionality.
My customer wants MD110 with CLI what do u suggest guys.
Customer has BC 9 and wants more most likely it be BC 11 now and he wants CLI on both how can we help.
Please advice.
Gallian
I think the best way to get some answers is to get your serviceprovider to take this up with their account manager in Ericsson.
I'm pretty sure CLI on analoqe don't exist in BC9 .
( but of course it could also exist as OMR for other markets than your own)
I'm pretty sure CLI on analoqe don't exist in BC9 .
( but of course it could also exist as OMR for other markets than your own)
- Status
Similar threads
- Locked
- Question
