Caller ID

[cadieuxr]

Hi

Is there a way on the Mitel 3300 to have the caller ID for only 7 extensions to say Blocked ID. I know I can change the number that is displayed but I really need it to say Blocked ID.

Thank you,
Richard

 

[kwbMitel]

Assuming the following (Please provide in the future)

3300 MCD
PRI Trunks
Configured for Call by Call

If assumptions correct, then Yes

**********************************************
What's most important is that you realise ... There is no spoon.

 

[cadieuxr]

Hi,

Sorry. Yes it is a 3300 MCD v6.0 SP3 with PRI Trunks. I believe it is Call by Call, but how can I confirm it?

 

[kwbMitel]

In your ARS modified digits do you have any digits inserted before dialing?

e.g. {000}

If not, then call by call is not active

Forms:
[ul]
[li]Bearer Capabilities[/li]
[li]Calling Line ID Restriction <-- This is the one you want to be Call by Call[/li]
[li]PRI/QSig Network Specific Facilities[/li]
[/ul]

You can leave Bearer and Network at default and only set Calling Line ID restriction to Call by Call.

In this case, you would need {0} (Send digits) and {1} (Don't send) in your modified digits.

If yes, then you need to build a route that uses {001} instead.

Then either get your users to dial a different access code, or COR restrict them from the standard routes and force them to the alternate routes.

**********************************************
What's most important is that you realise ... There is no spoon.