Caller ID on VDN/Vector

[tfp2006]

Communication Manager 6.0 using PRI.
Inbound calls to a DID receive caller-id including calling party name. However if incoming call on same PRI/trunk group is handled through VDN/vector/auto-attendant the stations display only shows caller-id number but not name.

 

[montyzummer]

as far as i am aware if calls route through a vdn the only name display you will see is the name of the vdn, see thread

http://www.tek-tips.com/viewthread.cfm?qid=1683171

for a potential work around.

APSS (SME)
ACSS (SME)