Everyone and their mother is trying to figure this out and no-one can. I have a tieline between my office (opt 61 25.4) and a far end (opt 11 25.3). When I call someone my display shows their name & DN. If the person who I am calling is already on a call I only see the DN and don't see their name until they answer. When they call me they always see my name and DN, regardless of whether or not my primary DN is already engaged. Any suggestions are greatly appreciated. Thank you in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
caller ID on tieline
- Thread starter coniglio
- Start date
on the far end try tdd for the display sets, make sure your rcap had nd3, i think is the newest name display.. make sure the rcap is the same for both ends and that both are either vod or vce, not mixed.. might want to check to see if they are both set int..
john poole
bellsouth business
columbia,sc
john poole
bellsouth business
columbia,sc
- Thread starter
- #3
- Thread starter
- #5
Nortellian
Technical User
You could apply their names to their hunt line.
- Thread starter
- #7
- Thread starter
- #8
- Status
Similar threads
- Locked
- Question