Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Caller ID on BC13SP6

Status
Not open for further replies.

SuperTech2010

Programmer
Oct 4, 2008
12
SA
waht is the route setting (ROCAP,RODAP) to support caller ID?
 
What type of route? please provide current route configuration RODAP, ROCAP, RODDP.

TELEC3
 
We have MD 110 BC9, there are 2 lim there 1000 extension in both lim

But the extension in lim 2 not working and we dont we have return the old back up by pc region but still the lim 2 extension not working.

we used our best level to find out the errror but not givin any error..

any help plesase

Mohammed Alhadi
 
Is this the same caller ID issue? or is this a new topic?

TELEC3
 
SuperTech2010,

you can't have 1000 extensions per lim, pls do syecp for actual line & extensions.
 
TLU 83 CAN SUPPORT CALLER ID. BUT WHAT KIND OF CALLER ID IS YOUR INCOMING TRUNK? FSK OR DTMF?

TLU83 CAN BE SUPPOTED CALLER ID FSK AND IT CONVERTS TO DTMF CALLER ID YOU CAN SEE ON THE SCREEN OF DIGITAL AND ANALOG EXTENSIONS.

I HAVE ONE AND IT WORKS GOOD.
 
<ROCAP:ROU=80;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
80 0120100000000010 7 2100030000 0 30 128 01151515 100001000000 001100

END

<RODAP:ROU=80;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
80 TL11 H'00030012 H'00000188 H'00202815 NO

END

SuperTech2010 YOUR MD-110 VERSION SHOULD BE AT LEAST. BC-13 SP-6 ..OTHERWISE YOU CAN'T.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top