Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Caller ID on 6X16

Status
Not open for further replies.

chiden

Vendor
Dec 27, 2006
178
US
Installed third line for customer with 6X16 with CI6 Caller ID Module. They want line 3 to have Caller ID appear without pressing Feature 811 for Extension 221. I assume you have to go into programming for module. I assume it's probably something similar to RAD where enter Feature code. Any help or reference to where to get manual would be super.
 
You may need to assign 221 as the CLID set for the line if this is an older versions of CICS

Older versions only allow one set to have the CLID feature. L1 & L2 may have been assigned to 221 by default.

This is my best guess
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top