Caller ID on 6X16 DR5 DS

[dcomp11]

Is Caller ID built into the 6X16 with DR5 DS, or do I need an add on module?

 

[PERRYPJ]

YOU NEED A CLID TRUNL MODULE

OLD ROLMEN WORKING ON NORTELS

 

[A2Xprt]

For a 616 you will need a C6 module. It's wired across your punchdown blocks for the trunks. CID trunk cards are for the Modular ICS line. The 8x24 system uses the M8 module.

 

[dcomp11]

Thanks alot.

 

[thtek]

What is an M8 module?

I know you can expand you 8X24 with a copper expansion carde, trunk module and ls/ds cards. That is regular lines, I am not sure if you can use ci cards on it that is why I am asking.

 

[Arr]

You can use CLID trunk cards on an 0X12. It is unclear, however, whether or not you need also to have the M8 loaded up first in order for the CLID trunk cards to work.

PhM

 

[thtek]

what is an M8?

Thtek

 

[shipwright]

It's a caller id interface module,the phone lines are "teed" through it, also requires an extension port connected to it.

 

[shipwright]

OH i forgot an M8 is for the 8X24 modular ksu.

 

[HighMeridian]

Not to mention that the M8 is impossible to find.

 

[shipwright]

I've got one if you need it.

 

[HighMeridian]

How much?