Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Caller ID not carried through IP Office 406 5.0

Status
Not open for further replies.

streaker1974

Technical User
Mar 9, 2011
28
US
I have a customer that has an IP Office 406 that was upgraded from a 4 to a 5. Since doing this, when a person calls in, and it is transferred to an outside number (trunk to trunk) the calling party's caller ID is not showing up. It shows the company's caller ID. They said it used to work. Any help would be appreciated!
 
How is it transferred off site?

Does the user answer the call and transfer it, is it a forwarded extension, mobile twinning?

"Trying is the first step to failure..." - Homer
 
That is the risk with upgrading, what used to work suddenly doesn't on a higher release.
I have had the same issue and until today's latest release it still doesn't work[mad]
 
Janni78, they don't have twinning, but yes it is on transferred calls, and forwarded calls
 
Transferred calls I do not think would ever worked. how is the system to know you are about to transfer a caller & not just make an enquiry call?

forwarded calls may work but would require support form the line provider (level 5 CLI Presentation on a UK ISDN others may vary)

what do you see for a forwarded call on system monitor?

A Maintenance contract is essential, not a Luxury.
Do things on the cheap & it will cost you dear
 
Try this

Here is how I setup the system to pass the caller ID: Set up a system short code

*2N
Dial
Nss
0 (PRI)

User:
Forward Unconditional: Checked
Forward number : *2 cell number

 
Thanks everyone for all of your help! NYSTech, I will try the short code!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top