Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Caller ID Name on opt 81/5.0

Status
Not open for further replies.

mjwald

Technical User
Feb 26, 2009
83
US
Trying to figure out how to get CLID Name on our PRIs.
I've found some reference to this in a few old posts, but they are less then forth comming with the answer.

I get number just fine, but no name.

 
look at your rcap on the d. you can trad inbound calls to see if your provider is sending

john poole
bellsouth business
columbia,sc
 
currently it is set to CLOP, should it be NDS?
 
It does not allow me to change RCAP, any entry even reentering what's in there now produces err sch0531.

RCAP looks kind of like a cls, I should be able to put multiple enries into it?


fyi: sch0531 = Unable to match input with stored mnemonics

 
What is the settings for your PRI? I have only seen this working on a NI2 span. Not that it will not work on others but this is the one I know works. Also if this is an existing PRI, it may be that feature is not on the PRI at all from telco. You do not change COLP you only add NDS. Also you have to disable the dchannel to make changes.

Signature==========================================
Deck Staining
SEO Consulting
 
You know I tried this 10 times easy, would not work. Tried it today, worked great. Oh well

Thanks for your help, it took the nds entry just fine.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top