Caller ID name across WAN

[plough]

SITE 1 I have an option 11 (5.0) with a PRI and Inbound Caller ID Name & number work GOOD for the entire block of DID's at that site.

There is a WAN rt pushing a certian block of DID's to aother site through an NRS.

SITE 2 option 11 mini (5.0) only gets caller id number ok but NO NAME.

I have verified that the WAN rt dch has RCAP as ND2 at both locations.

 

[BkMesser]

I have a similar setup here. Here is my dch programming.

ADAN DCH 30
CTYP DCIP
DES virtual
USR ISLD
ISLM 4000
SSRC 1800
OTBF 32
NASA NO
IFC SL1
CNEG 1
RLS ID 3
RCAP ND2 MWI TAT
MBGA NO
H323
OVLR NO
OVLS NO

 

[johnpoole]

if you make the routes internal, i've never had a problem with names

john poole
bellsouth business
columbia,sc

 

[plough]

Wjat do you mean by making teh routes internal?

 

[plough]

We found the issue.

NDS was missing on the PRI
(Name Diplay Service)