johnnytelexperts
Technical User
When an incoming call on a 200icp or 3300icp, can the user see the caller id information for a second call. If so is it the prime or multicall key. Need to know for a potential sale, thank you.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Caller ID information on a second incoming call 200icp/3300icp
- Thread starter johnnytelexperts
- Start date
- Status
- Thread starter
- #2
johnnytelexperts
Technical User
p.s. could be copper or pri, unsure atm.
DomingoDolores
Programmer
What IP Phones are you gonna use? and what platform?
follow me on twitter:
follow me on twitter:
Telecomp9434
Vendor
200 ICP (YES)
Display Caller ID for Non-Prime Lines (Option 509): Allows the display on MITEL telephones (SUPERSET 4DN telephones excluded) to show the caller ID for multi-call lines, key lines, direct trunk select lines, and CO lines.This option functions with Feature Level 3 or greater in System Option 102.
3300 ( YES)
Display Caller ID on Multicall/Keylines: Select "Yes" to display calling line identification on multicall and keyline appearances of directory numbers for SUPERSET display telephones. Select "No" and no information is displayed.
GL
"voice and data solutions"
Display Caller ID for Non-Prime Lines (Option 509): Allows the display on MITEL telephones (SUPERSET 4DN telephones excluded) to show the caller ID for multi-call lines, key lines, direct trunk select lines, and CO lines.This option functions with Feature Level 3 or greater in System Option 102.
3300 ( YES)
Display Caller ID on Multicall/Keylines: Select "Yes" to display calling line identification on multicall and keyline appearances of directory numbers for SUPERSET display telephones. Select "No" and no information is displayed.
GL
"voice and data solutions"
- Status
Similar threads