CALL TRANSFER 1

[vipalaci]

I need to know:

Additional this XFA parameter; What do I nedd to Call Transfer work?

Thamks

 

[McGruff753]

Do any of the phones transfer properly? If so, then print both the TN's (The one that works and the one that doesn't) and do a side by side comparison.

 

[vipalaci]

NO, any of the TN`s on the switch donn`t work

 

[McGruff753]

Can you post a TN printout so we can look at it? Thanks.

 

[vipalaci]

ok:


TN 8 0 6 7
DATE
PAGE
DES

DES EXTENS
TN 008 0 06 07
TYPE 500
CDEN 4D
CUST 1
DN 40213 MARP
AST NO
IAPG 0
HUNT
TGAR 0
LDN NO
NCOS 5
SGRP 0
RNPG 0
XLST
CAC 0
CLS TLD DTN FBD XFA WTA THFD FND HTD ONS
LPR XRA CWA (ACTIV) SWA MWD LPD XHD CCSD LND TVD
CFTD SFD MRD C6D PDN CNID AUTU
ICDD EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA UDI RCC HBTD DDGA NAMA MIND
NRWD NRCD NROD CRD PRSD MCRD
EXR0 SHL ABDD CFHD
CWND USRD BNRD OCBD
PLEV 02
FCAR NO
FTR CFW 16
DATE 6 FEB 2004


NACT

 

[bassethound]

vipalaci, You will need to add FTR ISP, the default is 75 (750ms). This enables hook flash. Also if you want to call forward off site, FTR CFW 16, you will need to set CFXA in the CLS (be careful of who you allow to call forward off site as it can be abused).