Baitshopboy
IS-IT--Management
I need to setup a trac to run for about 24 hours. If I do an entc and then gotr do I need to stay logged in and in ld 80 for the entc to run? If I leave the ld will it stop running?
Cheers!
Cheers!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call Tracing
- Thread starter Baitshopboy
- Start date
- Status
LD 80 provides a means of tracing a call by looking at a snap shot of the
transient data (such as call register contents) associated with the call. The
trace commands operate only when this Overlay is active. If LD 80 is
aborted (****), the trace functions stop. Note that when using the enhanced
trace commands, the Overlay will not automatically abort (according to the
defined time-out period) if calls are being traced.
transient data (such as call register contents) associated with the call. The
trace commands operate only when this Overlay is active. If LD 80 is
aborted (****), the trace functions stop. Note that when using the enhanced
trace commands, the Overlay will not automatically abort (according to the
defined time-out period) if calls are being traced.
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question
