Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

call trace

Status
Not open for further replies.
Tacosoup

Tacosoup

Vendor
Apr 20, 2011
105
US
What does main_pm stand for on a call trace? I understand it shows status, when it s hows half disconnect does that mean my end or C.O?
Thanks
 
Sort by date Sort by votes
MAIN_PM = this is the main progress mark which identifies the
state of the call

HALFDISC = Trunk with answer supervision has not received a
disconnect signal from the far-end during trunk idling

All this information is in the maintenance section under LD 80
 
Upvote 0 Downvote
Thanks,
I am working on an OPT11 release 23 that keeps getting intermittent disconnects on outbound calls. I have reseated PRI/DTI card but the problem persists T1 is D4/AMI. I have tested with the carrier but they show no errors.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Robones
  • Locked
  • Question
Call server ip address suddenly changed
Replies
2
Views
226
Robones
Robones
finest
  • Locked
  • Question
Nortel Ringer/Buzzer while you are on a call
Replies
4
Views
502
finest
finest
phonetech2012
  • Locked
  • Question
xeta call acounting
Replies
0
Views
288
phonetech2012
phonetech2012
LittleMaster
  • Locked
  • Question
Call connects but no voice cs1000 with NGN MSAG
Replies
3
Views
452
Firebird Scrambler
Firebird Scrambler
CentralJIM
  • Locked
  • Question
no caller ID on PRI external call
Replies
5
Views
545
CentralJIM
CentralJIM

Part and Inventory Search

Sponsor

Back
Top