Call trace output 1

[telepath]

Good Morning every1
In what LD do I change this:?

CALL REF # = 17289
BEARER CAP = VOICE
HLC =
CALL STATE = 10 ACTIVE
CALLING NO = 78011 NUM_PLAN:UNKNOWN TON:UNKNOWN ESN:UNKNOWN
CALLED NO = 89178440 NUM_PLAN:UNKNOWN TON:UNKNOWN ESN:UNKNOWN
---- ISDN PRA CALL (TERM) ----
CALL REF # = 32
BEARER CAP = VOICE
HLC =
CALL STATE = 10 ACTIVE
CALLING NO = 78011 NUM_PLAN:E164 TON:UNKNOWN ESN:UNKNOWN
CALLED NO = 89178440 NUM_PLAN:E164 TON:UNKNOWN ESN:UNKNOWN

So it says TON :ABBREVIATED ESN:CDP

 

[Firebird Scrambler]

I thought it was in LD 80.

I think you can have 3 different trace outputs.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[telepath]

Thanks for your answer.
I think I did't explain correctly. That output I got it by tracking a PRI in LD 80 TRAD loop ch. I want to know in which LD can I change the programming (CDP,RLI,I don't know) so when I trace a call it says "TON :ABBREVIATED ESN:CDP" instead of UNKNOWN. This is related to the ID of calls at the receiving phone's display.

 

[bignose21]

change the DMI in LD 86 to type CDP

 

[telepath]

I think it is in that direction, thanks.