Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call to Forward automatically to Symposium if not answered

Status
Not open for further replies.

MtlSwim

IS-IT--Management
Apr 3, 2003
47
CA
Objective; Forward an external call to symposium if there is no answer after 5 rings
Meridian Option 11, Symposium CCS version4

My plan was to use the revert number in Call Pilot, and put a CDN which is configured with a script in Symposium.
In other words, the call comes in, rings on the telephone set, and would hopefully forward to the revert number in Call Pilot instead of voicmail. The revert number would be a CDN configured in symposium.
When i test using my cell phone, it does not work and i hear the recorded voicemail greeting.
The CDN works when I call it directly.
 
In order for the revert DN to be called, the caller must dial 0 during the voicemail message.

Matt
Forex Capital Markets
CS 1000E VoIP/Symposium Admin
 
another work around.. are you using a 2250? either way if you allow fba.. then unansewered calls (did's only) will forward to the atdn.. find the right combination to make that a cdn.. include it in your master script..

of use cfta and send external to a cdn

john poole
bellsouth business
columbia,sc
 
OK.. in call piliot I thought this would work:
"Block message call handling" < > transfer to revert DN
I created a separate telephone set for this number and configured the FDN and Hunt with the CDN and it seems to work!!. (I had this number as a 2nd number on a couple of phones). Thanks guys.
Can someone give me an explanation of Hunt and how it is different the FDN (forward no answer)?

 
i need to have the 2250 ring on console and cfw no answer to mail after say 20 seconds. i have set this to 20 seconds but its still not forwarding to mail if not anserwered by console, i have set the aodn to go to mail. I cannot use night service as this needs to be active 24 hours
 

i need to have the 2250 ring on console and cfw no answer to mail after say 20 seconds. i have set this to 20 seconds but its still not forwarding to mail if not anserwered by console, i have set the aodn to go to mail. I cannot use night service as this needs to be active 24 hours
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top