Call routing through SIP line 2

[kuchulane]

Hi all

I have configured a new SIP line in IP Office 406(V2) with software version 4.1.
Now I want all the outgoing call made through the SIP line.

The Short code I used is

Code: 0N;
Feature: Dial
Telephone Number: 0N"@draytel.org"
Line Droup ID: 100

the problem is, it DOES NOT work.
But If I replace the ;(semi-colon) with a # it work fine.
But in order to make the transfer to SIP trunk seamless to users, I need to get this done without # or *.

Please help.

Many Thanks

 

[Bas1234]

Make a

Short Code

Code: 0N
Feature: Dial
Telephone Number: 0N
Line Droup ID: 51 (or your first free ARS option)

Then cerate an ARS

Code: 0N;
Feature: Dial
Telephone Number: 0N"@draytel.org"
Line Droup ID: 100


Greetzzz...Bas

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[kuchulane]

Hi bas1234

I have tried and I have partial success. it does dial the number but when I checked it in the CallStatus outgoing number was something like this

0128@draytek.comxxxxxxx
looks like it is send the first 4 digits first then SIP Server address and then the remaining 7 digits. I have checked the config again and again but don't know why it is doing that.
Any ideas.

Many thanks.

 

[mattKnight]

SIP requires en-bloc dialling

For testing I programm a shortcode

sc - *75
Feat - Dial
TN - 01234567890"@draytel.org"
LG - 100

However, you need to
1) fiddle with the system dial delay and digit count timers
or
2) use explicit number of digits in the shortcode i.e.

sc - 0XXXXXXXXXX
Feat - Dial
TN - 0N"@draytel.org"
LG - 100

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.

 

[kuchulane]

All sorted

Many Thanks guys