Call Routing between CS1K and CUCM

[phonedudeSr]

Does anyone have the basic configuration for installation of PRI/QSig tie lines between a 2951 and a Nortel PBX CS1000M. I a looking to bring the PSTN PRI into the 2951 and connect CUCM 9.x to the CS1K to process on-net and off-net dialing.

 

[Pir8Radio]

i can give you the nortel side config... I didnt do our CUCM gateway end. Let me know if that helps...

 

[Jeffnortel]

Not sure about the Cisco side but this doc should be all you need for the CS1k. I've used this several times and never had an issue.

http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns784/712433.pdf