Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

call piolot 100

Status
Not open for further replies.

shads1234

Technical User
Jun 1, 2014
3
JM
My customer,s,
call pilot 100 stopped working - ( I am unable to access all features ( 983 ,981 et al
The response from the Norstar System Ics 0X32 is inactive feature even though Maintenance -Port/dn status
Port device is Stk1
Will much appreciate some help here
 
The best help I can give you is to call in tech.

Marv ccna
telemarvlogosmall.gif

Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
 
Look at the lights on the CallPilot 100. Are any of them lite? I had a similar problem in that the power supply was good, the lights were on but nobody was home...no access via codes. It turned out that the main processor inside had fried so the whole unit had to be replaced. You could try and see if you can communicate with the CallPilot via a LAN connection if it has one. Also a re-boot might bring it back to life.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top