Call Pilot - ** not working (remote access). 1

[curlycord]

Call Pilot 3.1

When doing ** it thinks i just did 1 star and ask's me to enter the mailbox I want.

Return to AA is ON!

This is my own CP 150 at home....upgraded it to 3.1 from 1.5 was the last thing I did but cant say it worked before then as I never needed to until now.

KSU is 7.1

Been through everything via 983 and Browser and when curlycord cant figure it out he has to ask his homies for help.

Cheers
CC

 

[lugerlover]

try slower * *

 

[curlycord]

Bionic Betty doesnt like it when I do things to her slowly.

 

[lugerlover]

all women want it slowly

 

[Crowtalks]

Make sure Enable External Initialization is checked

 

[exsmogger]

Also try setting lines for long C.O.

Brian Cox

http://www.jandjcommunications.com

 

[curlycord]

Ok will try those in a few days as wont be home till then.

Thanks
CC

 

[curlycord]

Slow does not help
Fast does not help
Enabling External does not help
exsmogger what part of programming?
Disable Return to AA then Re-enable does not help
TouchTone Gate does not help
Reboot does not help
REINSTALL and forget to backup the damn thing the impatient bastard I was because you had every possible keycode for a 150 in the damn thing DID NOT HELP!!!.
Go to Config it to have French available as the ONLY 2 choices for some damn unknown bloody hell cheatin hackin no good for nothing low life CP reason most certianly does not help my English of a bloke ass.
A double Crown Royal over 2 cubes of ice.....helped!!

Guess I need to get the latop out and play tech once again and figure out and redo all the keycodes and Language Utility ( I use UK...she's sexy).

Just thought I would update.

CC

 

[lugerlover]

are u using a n* phone ...if so try long tones

 

[curlycord]

That did not help!

So I tackled this again yesterday.
I tried a reinstall again and same thing where I got FrchEng and FrchEng as my only language choices.
Tried an to upgrade but got stuck halfway through.
Pulled out my software and tried the upgrade tool alone....stuck in same place.
Swapped the 2 cards thinking maybe I had them backwards and same thing.
tried just one card and same thing...tried the other and same thing.
Now I have a usless Software card and a usuless Upgrade card.......wisky!.

Redo the software on my cards today at the office, try the one on a test CP150 and it works but the same bloody thing where ** WONT WORK!.

Configuration in browser says UK, change to NA and presto it wadda ya know it help!!!!!.

If UKers would use ** like us over here then I wouldnt have had to deal with all this BS then would I?

LMAO!

Cheers

 

[RikRodgers]

I've never run into a UK sw, just NA Eng, but I'll put that into my "book of flags". -Thanks.

I'll start carrying a pint of Crown Royal, too.

 

[exsmogger]

Thanks Curlycord. I'll make a mental note of this as we run into systems with UK English, Canadian English and Australian English. Silly me, I thought we all spoke the same language! ;-)

Brian Cox

http://www.jandjcommunications.com

 

[bwtc]

Could the UK version have a different key combination (such as ##) to access the mailbox ?