Did someone experience this before with callpilot 201i and Symantec endpoint protection 6.0.5?
CallpilotHello
I’m a system administrator and I’m not very familiar with the Nortel systems like the callpilot, so I’m managing about 24 callpilots (201i and 1005R)
Each call pilot has Symantec Endpoint protection 6.0.5 installed (with antivirus, anti spyware and proactive threat protection options), this one is updated once a week during the night (between 0:00 and 4:00)
So I’m experiencing an issue with a single callpilot 1005R, the systems (callpilot) stops running properly and was getting these errors periodically
Event Type: Error
Event Source: NGen
Event Category: Major
Event ID: 60920
Date: 8/19/2010
Time: 8:28:10 AM
User: N/A
Computer: CXXXXX
Description:
Event from Access Protocol Emulator[0] : Access link is down
Event Type: Warning
Event Source: NGen
Event Category: Minor
Event ID: 58005
Date: 8/19/2010
Time: 8:28:20 AM
User: N/A
Computer: CXXXXX
Description:
Event from SLEE - Telephony Exec GAM[19:CCR0c218006;SPC08218002;AnswerCall] : Failed to answer the call. rc= 57205, TAPI or CTMS rc= -2147483576, # attempts= 6
Event Type: Error
Event Source: NGen
Event Category: Major
Event ID: 55716
Date: 8/19/2010
Time: 8:28:20 AM
User: N/A
Computer: CXXXXX
Description:
Event from AppBuilder BRM[19:ABInitSession] : System error occurred in AppBuilder application. AppID = CPE_fermeture_fr_9200021.
Event Type: Information
Event Source: NGen
Event Category: Info
Event ID: 56008
Date: 8/19/2010
Time: 8:32:42 AM
User: N/A
Computer: CXXXXX
Description:
Event from SLEE internals[18] : Current application has terminated and recovered.
When I disabled the antivirus for 3 weeks the system runs correctly and no issues have been found, then I re-enabled the AV and the issue reoccurred again
It’s weird because the issue is occurring only for this single system and everything runs properly on the others
Is there something I have to check? Do you have any suggestions for how to trouble shoot this issue and find what is causing it?
I opened a ticket with Symantec with no result, they told me the issue with the Nortel application, since the other system are running without any issues
I appreciate you help
CallpilotHello
I’m a system administrator and I’m not very familiar with the Nortel systems like the callpilot, so I’m managing about 24 callpilots (201i and 1005R)
Each call pilot has Symantec Endpoint protection 6.0.5 installed (with antivirus, anti spyware and proactive threat protection options), this one is updated once a week during the night (between 0:00 and 4:00)
So I’m experiencing an issue with a single callpilot 1005R, the systems (callpilot) stops running properly and was getting these errors periodically
Event Type: Error
Event Source: NGen
Event Category: Major
Event ID: 60920
Date: 8/19/2010
Time: 8:28:10 AM
User: N/A
Computer: CXXXXX
Description:
Event from Access Protocol Emulator[0] : Access link is down
Event Type: Warning
Event Source: NGen
Event Category: Minor
Event ID: 58005
Date: 8/19/2010
Time: 8:28:20 AM
User: N/A
Computer: CXXXXX
Description:
Event from SLEE - Telephony Exec GAM[19:CCR0c218006;SPC08218002;AnswerCall] : Failed to answer the call. rc= 57205, TAPI or CTMS rc= -2147483576, # attempts= 6
Event Type: Error
Event Source: NGen
Event Category: Major
Event ID: 55716
Date: 8/19/2010
Time: 8:28:20 AM
User: N/A
Computer: CXXXXX
Description:
Event from AppBuilder BRM[19:ABInitSession] : System error occurred in AppBuilder application. AppID = CPE_fermeture_fr_9200021.
Event Type: Information
Event Source: NGen
Event Category: Info
Event ID: 56008
Date: 8/19/2010
Time: 8:32:42 AM
User: N/A
Computer: CXXXXX
Description:
Event from SLEE internals[18] : Current application has terminated and recovered.
When I disabled the antivirus for 3 weeks the system runs correctly and no issues have been found, then I re-enabled the AV and the issue reoccurred again
It’s weird because the issue is occurring only for this single system and everything runs properly on the others
Is there something I have to check? Do you have any suggestions for how to trouble shoot this issue and find what is causing it?
I opened a ticket with Symantec with no result, they told me the issue with the Nortel application, since the other system are running without any issues
I appreciate you help