Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Pilot LAN connection

Status
Not open for further replies.

IPO

Vendor
Jun 8, 2006
4
CA
Our call pilot was initialized and now we cannot conect via the LAN connection with our laptops using the default IP address
 
On the server do start>run>cmd> then "ipgonfig /all" (no quotes). You should have two adapters listed one going to the ELAN (PBX) and the other going to the CLAN (customer network). The CLAN will be the IP for the web client. The URL should be (insert your ip address in there)

If that doesn't work it's a network issue. Try going to that URL from the server first, then your PC.

Let me know.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top