Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call pilot IP address
- Thread starter caleb0mm
- Start date
Also check the crossover cable. Pins 1 & 2 and pins 3 & 6 are swapped at each end.
Brian Cox
Brian Cox
I use a switch - that way you don't have to worry about the crossover cable. (On the bench of course)
You can also (once you have the IP address in your laptop or PC programmed) click on Start, Run, and CMD. (bring up a commnad prompt).
Type the following:
ping 192.168.110.10
If you get a reply from, that means you should be able to access it from a web browser.
You can also (once you have the IP address in your laptop or PC programmed) click on Start, Run, and CMD. (bring up a commnad prompt).
Type the following:
ping 192.168.110.10
If you get a reply from, that means you should be able to access it from a web browser.
endlesswinter
IS-IT--Management
subnet 255.255.255.0
gateway dosnt matter
gateway dosnt matter
- Status
Similar threads
- Locked
- Question