Call Pilot BCM 200 down

[mtptdt]

Hi All.
Call Pilot on BCM 200 Release 3.6 not functioning.
Cant get in to it trough Call Pilot Manager.
Try to start manually through Service manager it just keep on going back to stop. Any idea.
Thanks in advance.

 

[3Sixty]

Are the lights on the BCM 200 flash or are they as they should be solid?


Thanks,
Colin

http://www.3sixtynetworks.com

 

[mtptdt]

mrmarshal.
The unit in the remote location. Ill let you know as soon as I get that info.
Thanks.

 

[curlycord]

Maybe bad BFT or HD is dying.

BFT with old green caps are bad, they will look like they are ready to pop at the top.


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[3Sixty]

Sounds like that to me also curlycord but might be lucky and the NT platform has had a senior moment and a complete power off and restart may fix but I would say it is Motherboard or Hard drive it sounds about the right vintage for the motherboard problem. I used to have a tool that told you via the NT number but cannot place it.

Thanks,
Colin

http://www.3sixtynetworks.com

 

[mtptdt]

Im leaning toward HD issue.
I guess I'm gonna have to investigate a little further.
Thanks all for responding