Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Pilot 150 power supply

Status
Not open for further replies.

norstargirl

Vendor
Dec 21, 2001
223
US
has anyone had the problem with a call pilot 150 and the power supply melting...

M.Parnell
(norstargirl)
 
typical, just relaced 3 in the last summer, they are the old ones, 3 prong, the new ones are 2 prong.

I'm not sure of the code, but seem to be easy to track down. The transformer simply seem to heat up.
 
I've had a million power supplies for callpilot's 100 heat up on me and eventually stop working the callpilot.
 
Ive had to replace a lot of them but I have not had one that melted... the whole right side was melted to the board

M.Parnell
(norstargirl)
 
We should be happy the place did not burn down, could have been dramatic. Change subject, a client's golf club house burnt down twice in 4 years, 3 phone system later......

Thanks
 
I had one of the old 9 volt power supplies that had the plalstic sag a bit and bubble out. Guess I'm glad it blew then instead of later.

----------------------------
JerryReeve
Communications Systems Int'l
com-sys.com

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top