Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

call pilot 150 and MICS

Status
Not open for further replies.

tommytommy011

Vendor
Oct 18, 2007
33
PR
I have a call pilot 150 2.1 and mics 7.0

when i do feature 985 it shows ext 297.

When I go to foward no answer, it doesn't accept it.

on port dnstatus it shows that port 113 has ext 233 on b2 and 297 on b1.

I put 233 on fwd no answer to see if it works but nada.

please help!

tommy
 
Have you configured the Call Pilot?
What do you get when you do a feature983?
 
actually I didn't because they dont want a tree...they just want to activate voicemails on all extesions....feature 983 takes me to programming fine...

thanks,

tommy
 
It may not be seeing port 1 on the Call Pilot (DN 233) verify that port works from the MICS when you plug a 73XX phone into it. That could be why your DN inquiry shows as 297. The Call Pilot utilizes both channels of each port connected. Try disabling and re-enabling port 113 in maintenance and then restarting the CP.

NCSS NCTS NCTE
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top