infalex2xl
Systems Engineer
Hello colleagues.
Please help me to solve the following problem:
Hipath 4000v8 connected via sip to Asterisk.
When calling from asterisk to subscriber 1111, at this moment subscriber 2222 picks up the call, but on the display of my phone I continue to see as if I'm talking to subscriber 1111.
Does anyone have any suggestions what to do with this, what settings to check? in the asterisk log, I do not see any information about the number 2222, as if the PBX does not transmit this information.
Also, if I call from asterisk to subscriber 1111, and he has redirection to an external number, for example mobile, then the display does not show any sign that redirection has occurred. This is not critical, but it seems to me that this causes inconvenience.
[pre] <DISPLAY-COT:COTNO=25;
DISPLAY-COT:COTNO=25;
H500: AMO COT STARTED
COT: 25 INFO: COT FOR PBX
DEVICE: INDEP SOURCE: DB
PARAMETER:
PRIORITY FOR AC WILL BE DETERMINED FROM MESSAGE PRI
RECALL IF USER HANGS UP IN CONSULTATION CALL RCL
TRUNK SIGNALING ANSWER ANS
KNOCKING OVERRIDE POSSIBLE KNOR
CALL EXTEND FOR BUSY, RING OR CALL STATE CEBC
NETWORKWIDE AUTOMATIC CALLBACK ON BUSY CBBN
NETWORKWIDE AUTOMATIC CALLBACK ON FREE CBFN
NETWORKWIDE CALL FORWARDING PERMITTED FWDN
NETWORKWIDE FORWARDING NO-ANSWER FNAN
DON'T RELEASE CALL TO BUSY HUNT GROUP BSHT
END-OF-DIAL FOR BLOCK IS SET BLOC
ACTIVATE TRANSIT COUNTER ADMINISTRATION FOR S0/S2 LINE ATRS
CONNECTION TO ROUTE OPTIMIZATION NODE ROPT
TSC-SIGNALING FOR NETWORKWIDE FEATURES (MANDATORY) TSCS
TRUNK SENDS CALL CHARGES TO ORIGINATING NODE NUMBER TRSC
CALL FORWARDING PROGRAMING FOR OTHER SUBSCRIBERS CFOS
CALL FORWARDING VALIDATION PROCEDURES POSSIBLE CFVA
PIN NETWORKWIDE POSSIBLE PINR
AOC PER CALL (AUTOMATICAL OR ON REQUEST), MAND. CORNET-NQ AOCC
LINE WITH IMPLICIT NUMBERS LINO
B-CHANNEL NEGOTIATION (PREV. PREFERRED-PREFERRED COLLISION) BCNE
LAST REDIRECTING NUMBER IS SEND TO PHONEMAIL LRPM
NO TONE NTON[/pre]
Please help me to solve the following problem:
Hipath 4000v8 connected via sip to Asterisk.
When calling from asterisk to subscriber 1111, at this moment subscriber 2222 picks up the call, but on the display of my phone I continue to see as if I'm talking to subscriber 1111.
Does anyone have any suggestions what to do with this, what settings to check? in the asterisk log, I do not see any information about the number 2222, as if the PBX does not transmit this information.
Also, if I call from asterisk to subscriber 1111, and he has redirection to an external number, for example mobile, then the display does not show any sign that redirection has occurred. This is not critical, but it seems to me that this causes inconvenience.
[pre] <DISPLAY-COT:COTNO=25;
DISPLAY-COT:COTNO=25;
H500: AMO COT STARTED
COT: 25 INFO: COT FOR PBX
DEVICE: INDEP SOURCE: DB
PARAMETER:
PRIORITY FOR AC WILL BE DETERMINED FROM MESSAGE PRI
RECALL IF USER HANGS UP IN CONSULTATION CALL RCL
TRUNK SIGNALING ANSWER ANS
KNOCKING OVERRIDE POSSIBLE KNOR
CALL EXTEND FOR BUSY, RING OR CALL STATE CEBC
NETWORKWIDE AUTOMATIC CALLBACK ON BUSY CBBN
NETWORKWIDE AUTOMATIC CALLBACK ON FREE CBFN
NETWORKWIDE CALL FORWARDING PERMITTED FWDN
NETWORKWIDE FORWARDING NO-ANSWER FNAN
DON'T RELEASE CALL TO BUSY HUNT GROUP BSHT
END-OF-DIAL FOR BLOCK IS SET BLOC
ACTIVATE TRANSIT COUNTER ADMINISTRATION FOR S0/S2 LINE ATRS
CONNECTION TO ROUTE OPTIMIZATION NODE ROPT
TSC-SIGNALING FOR NETWORKWIDE FEATURES (MANDATORY) TSCS
TRUNK SENDS CALL CHARGES TO ORIGINATING NODE NUMBER TRSC
CALL FORWARDING PROGRAMING FOR OTHER SUBSCRIBERS CFOS
CALL FORWARDING VALIDATION PROCEDURES POSSIBLE CFVA
PIN NETWORKWIDE POSSIBLE PINR
AOC PER CALL (AUTOMATICAL OR ON REQUEST), MAND. CORNET-NQ AOCC
LINE WITH IMPLICIT NUMBERS LINO
B-CHANNEL NEGOTIATION (PREV. PREFERRED-PREFERRED COLLISION) BCNE
LAST REDIRECTING NUMBER IS SEND TO PHONEMAIL LRPM
NO TONE NTON[/pre]