Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Pickup Not Working

Status
Not open for further replies.

JonnyBravo1

Technical User
Jan 23, 2006
48
US
I am having an issue using call pickup. The 2616 cannot pickup calls from the 2006. The RNPG is the same on both sets. The 2616 can pickup other phones in the RNPG. Is there another setting, like a CLS or something I need to check?
 
pua needs to be in the cls

OLD ROLMEN WORKING ON NORTELS
 
If the 2616 can pick up calls on other sets, PUA is already in the CLS.
I agree with the person who said to post the printed tns on this site. Maybe somebody will see your problem.
 
Here are the two sets:

DES 41515
TN 004 1 05 15
TYPE 2616
CDEN 8D
CTYP XDLC
CUST 0
AOM 0
FDN 2599
TGAR 1
LDN NO
NCOS 3
SGRP 0
RNPG 25
SCI 0
SSU
LNRS 16
XLST
SCPW 1234
CLS UNR FBD WTA LPR PUA MTD FNA HTA TDD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRA NID OLA VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFA DDV CNID CDCA MSID DAPA BFED RCBD
ICDA CDMA MCTD CLBD AUTU
GPUA DPUA DNDA CFXD ARHD FITA CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
USRA ULAA RTDD RBDD RBHD PGND FLXD FTTU MCBN
CPND_LANG ENG
RCO 0
HUNT 2599
LHK 0
LPK 0
PLEV 00
AST
IAPG 0
AACS NO
ITNA NO
DGRP
DNDR 0
KEY 00 SCR 2102 0 MARP
CPND
NAME Cindy Alaniz
XPLN 27
DISPLAY_FMT FIRST,LAST
01 BFS 004 1 13 01
02 BFS 004 0 10 13
03 BFS 008 0 04 13
04 BFS 004 1 11 15
05
06
07
08 MWK 2599
09 TRN
10 RNP
11 PRK
12 SCC 0176
13 AO6
14 CFW 4 2390
15
DATE 14 APR 2006

____________________________________


DES 2006
TN 004 1 13 06
TYPE 2006
CDEN 8D
CTYP XDLC
CUST 0
FDN 2599
TGAR 1
LDN NO
NCOS 3
SGRP 0
RNPG 25
SCI 0
SSU
LNRS 16
XLST
SCPW 1234
CLS CTD FBD WTA LPR PUA MTD FNA HTA NDD
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDD
CFTD SFA DDV CNID MSID DAPA BFED RCBD
ICDA CDMD MCTD CLBD AUTU
GPUA DPUA DNDD CFXD ARHA FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
USRD ULAD RTDD RBDD RBHD PGND FLXD FTTC MCBN
RCO 0
BFTN 004 1 12 11
HUNT 2599
LHK 0
PLEV 02
FCAR NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
DNDR 0
KEY 00 SCR 2309 0 MARP
CPND
NAME Kim Norton
XPLN 27
DISPLAY_FMT FIRST,LAST
01 MWK 2599
02 AO6
03 PRK
04 RNP
05 CFW 4 2150
DATE 14 APR 2006
 
If we are talking about two extension on the same system, then I would chech the PLEV( one has 00 and the other 02)and the COS (unr and ctd). I wouldn't bet on the 2º but the first ... uhm ... never tried before ... check
I didn't look at all the CLS, if there are any restrictions active.
 
Sorry guys, I just had the wrong ext. It is working fine now. I think I need to slow it down a little. Thanks for the comments anyway.
 
Thanks for tip. I'll take care of that. Although, I think the last thing I need is to be hit on the head again.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top