Call Pickup command for analog handsets???? 1

[callaghann]

Hi guys,

I'm hoping this is a simple one.

Is there a command I can use to pickup incoming calls using an analog handset on a Siemens Hipath?

e.g. *7 works on a Nortel box.

Thanks in advance,
N.

 

[Silverblade]

Within a call pickup group it's *57

Otherwise it's *59N where N is the phone number of the ringing phone

(*7 is the code for speed dialing)

 

[callaghann]

That's great.
Thanks for the prompt reply.

Can you recommend a resource that lists these codes?
I'm sure I could make use of a few more if I knew them.

 

[Silverblade]

These are all the funtions including shortcodes.


Return to held call *0
Call forwarding *1
Toggle/Connect *2
Conference *3
Night answer on *44
Trunk flash *51
Mute on *52
DTMF dialing *53
Accept call waiting *55
Park call *56
Call Pickup (Group) *57
Initiate callback *58
Directed Call Pickup *59
Account code *60
Door opener *61
Override *62
Call forwarding to CO (ISDN) *64
View call charges *65
COS changeover on *66
Associated dial *67
Send message *68
Advisory message on *69
Use speed dialing individual/system *7
Speaker call *80
Relay on *90
Key programming *91
Change individual speed-dial numbers *92
Change PIN *93
Phone test *940
System Administration *95
Do Not Disturb on *97
Room Monitor *88
Ringing group *81
Call forwarding off #1
Night answer off #44
Mute off #52
Retrieve call #56
View/delete callback(s) #58
Cancel call forwarding to CO (ISDN) #64
Changeover off #66
View sent message #68
Advisory msg. off #69
Do Not Disturb off #97
Hands free answerback on *96
Hands free answerback off #96
Reset relay #90
Ringing group off - all members removed #81
Reset all services #0
Conference off #3
Query Caller List #82
Associated services *83
MCID *84
Rejoin hunt group *85
Leave hunt group #85
Missed calls - save number *82
Suppress calling ID *86
Enable calling ID #86
Waiting tone off (external) *87
Waiting tone on (external) #87
Ringer cutoff on *98
Ringer cutoff off #98
Start DTMF remote administration *991
Allow DTMF remote administration *992
Allow ISDN remote administration *993
Allow remote data query (inactive)*994
Release door opener with DTMF code*89
Lock door opener with DTMF code #89
Continue an external call after the hold key *63
Assign station numbers (MUSAP) *41
Log on UCD agents *401
UCD - agent log off #401
UCD - agent available *402
UCD - agent not available #402
UCD work on *403
UCD work off #403
UCD night service on *404
UCD night service off #404
UCD - calls in queue *405
Telephone Data Service (TDS) *42
Release trunk *43
PSE: locate *45
PSE: answer #45
Timed reminder on *46
Timed reminder off #46
Activate relocate *9419
Deactivate relocate #9419
Ready for login (CMI phone) *942
System telephone lock *943
Silent monitoring *944
Drop Last Conference Party within CO (USA only)
Call waiting terminating on *490
Call waiting terminating off #490
Language selection *48

 

[Monrovia]

woww

thanks a lot dear blade