Call Me not working MM w/SIP integration

[hdbeavis]

I have an MM R5.2 connected via DIRECT SIP trunk to the PBX, CM R6. All is working fine except "Call Me" to an outside number. I see the call come into the PBX but it is saying "User not found (adjunct origination)". I see the called number come in as"9xxx.xxxx@sipdomain.com". Is the switch not recognizing the leading digit of 9 is an ars call?? It is doing this for internal extensions as the destination also. The MM thinks it is getting an RNA event. Does anyone have any ideas?

 

[KenMeans]

it sounds like a P-Asserted Identity (in the VMSC / PBX / SIP tab)have you double checked the config note for MM it covers that issue

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[hdbeavis]

Sorry I did not get a notificaction of a post to this thread but yes that is exactly what it was and that is where I found it.

Thanks for the response!