Call Manager Express - updating extension name changes to 7961's 7914 module

[Funk49]

I have an older Call Manager Express (4.1) and I have updated some name changes on individual 7941 phones but I can't seem to get the 7914 module to update the name changes at the reception's 7961 phone.

There are DNs that act like BLF but I can't seem to find them under "PHONES". I see the 7961 but not the actual programming of the station appearances.

I trying to use the GUI and although making the other extension name changes was easy, I can't figure out how to update the sidecar with the new name changes.

Any help? Thanks

 

[whykap]

the configuration for the 7914 itself is under the 7941 phone it's attached to. Changing the info on a phone will not automatically change it on the side car.

 

[Funk49]

No I changed the extension names on the other 7941 phones, not the 7961 and its 7914 side car.

When I view the 7961 config I don't even see where the 14 lines are added for the side car.

The 14 lines on the side car still show the old extension names that I have already updated (on the 7941 phones), I just can't figure out how to update the 7914 labels/names. I tried resetting the phone and I can't find anything under 'Phones'.

Change Phone
Phone Physical ID : 1234.1234.1234
Phone Sequence Number : 1
Phone Type : 7961Add1
Call Blocking : Exempt Non Exempt
Video Enable : Disable Enable
Auto-Line Selection : In/Out Incoming Disable
Login PIN :
Receive Night Service Bell : No Yes

Phone Line Buttons
20 result(s)

Button # Extension(s) Ring Type/Mode
1 1, 21 [ Reception 1 ] Normal Ring
2 2, 22 [ Reception 2 ] Normal Ring
3 21, 41 Normal Ring
4 22, 42 Normal Ring
5 23, 43 Normal Ring
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20



Speed Dial Information
Note: The number of speed dial that will display on your phone depends on the type of phone, and the number of lines configured.
Speed Dial 1: Label:
Speed Dial 2: Label:
Speed Dial 3: Label:
Speed Dial 4: Label:
Speed Dial 5: Label:
Speed Dial 6: Label:
Speed Dial 7: Label:
Speed Dial 8: Label:
Speed Dial 9: Label:
Speed Dial 10: Label:
Speed Dial 11: Label:
Speed Dial 12: Label:
Speed Dial 13: Label:
Speed Dial 14: Label:
Speed Dial 15: Label:
Speed Dial 16: Label:
Speed Dial 17: Label:
Speed Dial 18: Label:
Speed Dial 19: Label:



Paging Information
Paging Extension 81 Unicast No Yes

 

[whykap]

You might need to do this from CLI. This link might help you out.

http://www.cisco.com/c/en/us/td/doc...dmin/configuration/guide/cmeadm/cmespeed.html