Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call Log on 9608 IP Phone 2
- Thread starter lcsavaya
- Start date
-
2
- #2
amriddle01
Programmer
Log missed calls answered at coverage" 
"No problem monkey socks
"No problem monkey socks
- Thread starter
- #3
teletechman
Technical User
Thanks also I just had this question raised and now have an answer.
Mike
Mike
- Thread starter
- #5
Yeah, just like a lot of IP office things, its not clear where I should start looking...but at least its an option. There are some things they just wont cover. We just started adding 96xx series phones, and the options are cool, but some people want this and that and this and blah blah blah. Stupid customers...now if only I could figure out Regions within DECT....
Regions within IPDect is easy.
You use regions when the basestation does not have coverage to the other basestations (it cannot sync)
If you have miltiple sites on one IPO you cannot have roaming on those basestations and need there own region.
One basestation needs to be the sync master per region.
BAZINGA!
I'm not insane, my mother had me tested!
You use regions when the basestation does not have coverage to the other basestations (it cannot sync)
If you have miltiple sites on one IPO you cannot have roaming on those basestations and need there own region.
One basestation needs to be the sync master per region.
BAZINGA!
I'm not insane, my mother had me tested!
- Thread starter
- #7
Yes, but, can you get the phones to re-register when they enter a new region? And what do you mean multiple sites on one IP office? I understand the Sync master portion. Just unclear on the rest, say I have 2 different areas, within 1 IP office system, how do I add another DECT line, as far as I can tell you are only allowed 1 in the system
You do not need another dect line because it is one system.
I do not talk about a SCN! but on one IPO with multiple locations and thus multiple locations with dect.
The system has the same sari code so the phones should register on a different region.
BAZINGA!
I'm not insane, my mother had me tested!
I do not talk about a SCN! but on one IPO with multiple locations and thus multiple locations with dect.
The system has the same sari code so the phones should register on a different region.
BAZINGA!
I'm not insane, my mother had me tested!
- Thread starter
- #9
Cool, Im gonna try that out, so you just set them to sync to the Regions MBS, thus having 2 MBS and the rest air synched within that region? I could not get it working, but now thats some insight!
Advanced Scenario: Separated Locations
In most scenarios, the master base station is also used as the air synch master for all the other slave base stations and
that is the scenario documented in this manual. However, in scenarios where you have base stations in separate locations
that are not within synchronization range of each other, it is permissible to assign separate air synch masters in each
location. However, there must be absolutely no overlap (<-90dB) between the separate groups of base stations. Any
overlap will cause frequent lose of synchronization.
Having separate locations, each with its own synchronization is done through the settings on the DECT | Air Sync tab of
each base station. For each location, set the same Sync Region number for all the base stations at that location, using a
different number for each location. In addition, set the Sync Mode of one of the base stations in each location as Master
Advanced Scenario: Separated Locations
In most scenarios, the master base station is also used as the air synch master for all the other slave base stations and
that is the scenario documented in this manual. However, in scenarios where you have base stations in separate locations
that are not within synchronization range of each other, it is permissible to assign separate air synch masters in each
location. However, there must be absolutely no overlap (<-90dB) between the separate groups of base stations. Any
overlap will cause frequent lose of synchronization.
Having separate locations, each with its own synchronization is done through the settings on the DECT | Air Sync tab of
each base station. For each location, set the same Sync Region number for all the base stations at that location, using a
different number for each location. In addition, set the Sync Mode of one of the base stations in each location as Master
That is the way it is.
rbs 1 -> master basestation and sync master on region 1
rbs 2 -> sync master on but a slave in the system.
When you have done it once you will really think how easy it was
BAZINGA!
I'm not insane, my mother had me tested!
rbs 1 -> master basestation and sync master on region 1
rbs 2 -> sync master on but a slave in the system.
When you have done it once you will really think how easy it was
BAZINGA!
I'm not insane, my mother had me tested!
- Status