Hi everybody
I have 2 question.please help me.
1 How can I have call log in openscape business X8 V3 with board OCCLA?
2 How can I have a report of what function each admin connected to the mentioned device performed on the device?
Best regards
1 Have you tried Expert mode > Basic Settings > Call Charges (I have no recent experience with it).
2 What exactly do you mean? The administrator in OpenScape Business Assistant?
Look in Expert mode > Maintenance > Admin Log
hello Sir
Thank you for your reply
I installed the Accounting Manager software but I don't have the call log. Please help me how I could configure Call Charge.
Dear, first open Hipath Manager 3000, and download data,
go to "call charge menu", tab "output format", tab "LAN setting"
select "TCP Client" add ip address of computer where you want dump CDR data, port = 23, file format = DOS
now download hyper terminal, run it, go to properties, add ip address of OCCL, port = 23, press "ok"
now select option "call" and select "wait for call" at bottom , you will see connected, wait few second you will get data.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.