Call log in X8 V3

[Karmozdi]

Hi everybody
I have 2 question.please help me.
1 How can I have call log in openscape business X8 V3 with board OCCLA?
2 How can I have a report of what function each admin connected to the mentioned device performed on the device?
Best regards

 

[Lexzie]

1 Have you tried Expert mode > Basic Settings > Call Charges (I have no recent experience with it).
2 What exactly do you mean? The administrator in OpenScape Business Assistant?
Look in Expert mode > Maintenance > Admin Log

 

[Karmozdi]

hello Sir
Thank you for your reply
I installed the Accounting Manager software but I don't have the call log. Please help me how I could configure Call Charge.

 

[Lexzie]

I am not familiar with the Accounting Manager software.

 

[AbdulRashid]

Dear, first open Hipath Manager 3000, and download data,
go to "call charge menu", tab "output format", tab "LAN setting"
select "TCP Client" add ip address of computer where you want dump CDR data, port = 23, file format = DOS

now download hyper terminal, run it, go to properties, add ip address of OCCL, port = 23, press "ok"
now select option "call" and select "wait for call" at bottom , you will see connected, wait few second you will get data.

 

[Karmozdi]

Dear
I did as per your document but I have this alarm
Best regards

 

[Karmozdi]

Hi
If anyone could , please guide me to solve the above problem.
Best regards

 

[AbdulRashid]

Hi
If anyone could , please guide me to solve the above problem.
Best regards

can you give me Anydesk connection.
time is 1420 here till 1630, i will be here.
i will configure from here.

 

[Karmozdi]

Hi
Dear Abdulrashid
I did it on X8 system but on 3800 device I could get report only through serial port I can't get report through lan port is it possible?
Best regards

 

[AbdulRashid]

Hi
Dear Abdulrashid
I did it on X8 system but on 3800 device I could get report only through serial port I can't get report through lan port is it possible?
Best regards

Yes you can get CDR data through serial port. see attachment .
as you says " I did it on X8 system" have you got CDR data on X8?

 

[Karmozdi]

Yes , I got CDR data on x8 through the lan port.
I only got CDR data by serial port On the 3800 device
It is important for me I have got CDR Report through the lan port .
Unfortunately, I could not
Is it possible I have CDR reports by lan port on Hipath 3800?
Best regards