Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call FWDing on SIP Trunk -- No Audio 1

Status
Not open for further replies.

IPXTech

Vendor
Jan 10, 2008
136
US
Hey, all.

Just wondering if someone's run into this. I've got a personal SIP trunk here in the office, but I've run into an issue where I call forward my extension to my cell phone, it rings my cell, and I pickup, but I have no audio from the other side.

Unfortunately I haven't messed with SIP trunks nearly enough yet, so luckily this is happening only on my own phone so far. But regular calls work perfectly fine. There are plenty of available VCM channels, as well.

If it's something easy/stupid, I'd love to hear it.

Thanks in advance.
 
IP Office does not officially support Invite without SDP messaging, however;
I had this issue with a SIP Provider of ours, that does not use Stun its uses a session border controller.

If you upgrade to 4.1.12 and ALLOW_REINVITE_NO_SDP in the NO USER source code.

This will be standard on off feature key in 4.2

Also check Re-Invite is checked.

Give it a try and let me know how you get on.

ACA - IPOffice implement
ACA - IP Telephony
CCNA - Passed at last
 
Does you router support something like nat redirection?

y1pzZTEUdok1vrI5cLb3FdPX4PgTPlSONkb5WPjz0x50etSujaMSmhdRCbOx9vASnrRNzzXv0IxNQA

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________
 
I do not think its this.

I bet he would get the same with Blind transfers too.

ACA - IPOffice implement
ACA - IP Telephony
CCNA - Passed at last
 
Thanks, I was able to screw around with it a bit and got it nailed down. Re-invite was turned off, but I noticed that this primarily only happens when calling from SIP Trunk to SIP Trunk. We've got 4 people in the office, all coming off the same trunk, and that's where the issue was --

So, it was a dumb error on me for the most part, for not testing more thoroughly. But thanks for the input!
 
I am still having this problem with SIP to SIP blind transfers!! SIP is cool but ISDN still rules!

 
What typ of phones are you using?

y1pzZTEUdok1vrI5cLb3FdPX4PgTPlSONkb5WPjz0x50etSujaMSmhdRCbOx9vASnrRNzzXv0IxNQA

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________
 
We're using all 5610 IP sets. I am using the normal 5610 firmware, however two of the people I've experienced this problem with are using the VPN Firmware.
 
mtechsteve

Its to do with SDP re-invite messaging and the IP Office not really supporting it.
Upgrade to 4.1.12 and put this in no user field.
ALLOW_REINVITE_NO_SDP

It will be a check box in future relases.


ACA - IPOffice implement
ACA - IP Telephony
CCNA - Passed at last
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top