Have a mics 7.1 pri. i have a did number with no phone that the customer wants to fwd out to a cell phone. i guess he has no one in the office at this did number. i set up the station and under capability set call fwd to 9 plus the cell number but calling the did it rings in on main rep desk. how do i set up call fwd on a did without an actual phone installed .
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
call fwd outside system
- Thread starter telco71
- Start date
curlycord
Programmer
You need 4.1 software or higher.
Allow Redirect on that phone that has the DID
Build a Dest code to use a Route
Tell the Route to use the BlocA
Feature 4 the set to the Dest Code and phone number
You could also use Line Redirect (F84)
Feature 84
Press DID line
Press Intercom
Dial Dest Code and phone number
That would allow you to intercom the phone without forwarding anywhere.
________________________________________
Add me to LinkedIN
=----(((((((((()----=
Toronto, CAN
Allow Redirect on that phone that has the DID
Build a Dest code to use a Route
Tell the Route to use the BlocA
Feature 4 the set to the Dest Code and phone number
You could also use Line Redirect (F84)
Feature 84
Press DID line
Press Intercom
Dial Dest Code and phone number
That would allow you to intercom the phone without forwarding anywhere.
________________________________________
Add me to LinkedIN
=----(((((((((()----=
Toronto, CAN
- Thread starter
- #3
Thanks culycord but i do not have a physical phone on this station to call fwd from. was just trying to do it from programming in system. guess i could install the station in phone rm and use it as a physical station to set call fwd but short on ports................thanks anyway
- Status
Similar threads
