Call forwarding dids externally 1

[hnm1]

Working on a Nortel Mics 6.0 .Is it possible to call forward d.i.d.s externally without having to have a phone or a ata programmed with the d.i.d.s, Tried a few different things in programming but have not found a solution. Customer is shutting down a part of the plant and wants to be able to call forward the d.i.d.s to cell phones without having the sets working.

 

[hnm1]

I forgot to mention these are analogue d.i.d.s not digital.

 

[jerryreeve]

you need something to hang the forward onto. you can send the DID into a hunt group that sends the call into a voicemailbox that has a dial 7 escape outside to the cell phone.

you can also send the DID call to a station and have the station forward to the outside number.

again you can send the did call to a station and have the station redirect the target line to the outside number.

all three of these need you to allocate some resourse to let you make this function.

----------------------------
Hill?? What hill??
I didn't see any $%@#(*$ Hill!!
----------------------------
JerryReeve
Communication Systems Int'l
com-sys.com

 

[RikRodgers]

If you program redirection on a set, then unplug the set, the redirect will remain in place... Make sure you keep good records if you do this.

 

[curlycord]

I use customers RAD's for this feature for those who have RAD's, this way you have full control. Line just appearing on the RAD will do.




=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[exsmogger]

Nice tip curly

Brian Cox

http://www.jandjcommunications.com

http://groups.to/jandj/

(updated 3-13-09)

http://phonewire.blogspot.com/

(updated 3-13-09)

 

[norstarmainly]

hey i buy from jand j a whats up to bill and jim ,, great guys.. liked jerrys the best, didnt know about that at all, cool stuff....