Call Forward with no ringing

[kwing112000]

I have a IP500 with voice T1. It is an AMI,D4 T1 which i usually dont see. Everything is usually B8ZS/ESF. My issue is when i forward unconditional there is no ringing on the callers phone. They get dead air. I have spoken with the carier and they say "its not us" I have checked everything i can think of in the IPO and nothing helps. It is running 4.0.7. Let me know if any of you have ever run into this one before.

 

[aarenot]

Can you get ringing if you set the timer to a couple seconds rather than unconditional?

 

[memphistim]

I have this same issue as well, but my T1 is B8ZS/ESF E&M Tie.....have you received any info on how to resolve this or have you opened a ticket up with Avaya?

 

[kwing112000]

We opened a ticket with Avaya and they sent us out a patch. We loaded it and all is good. i would imagine 4.0.10 may fix it. i have not looked at the list to see if it does.