Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Forward on Busy

Status
Not open for further replies.

tjc2013

Technical User
Jun 4, 2013
39
GB
Hey all - I'm looking to do a call forward on busy only is this possible? If so can you show me how please.

Cheers
 
Yes agreed that is a bit vague.

Nortel CS1K and ip phone

Cheers
 
Change HTD to HTA (CLS) and define an HUNT number to which you want forward the call


Meridian, Callpilot, CCM (Symposium) from Germany
 
Forwarding and Hunting are 2 completely different things, Hunting is a busy condition and forwarding is a no answer condition. You need to figure out what you want. Most people send their Hunt and FDN to the same place but it doesn't have to be that way.
 
@ KCFLHRC He asked for callforward on busy ...

Meridian, Callpilot, CCM (Symposium) from Germany
 
Understood m1spezi, however, I think he may actually be looking for something else the Call Forward Busy since it only does this

description
Call Forward Busy (CFB) automatically routes incoming Direct Inward Dialing (DID) calls to
the attendant console when a telephone is busy. This capability is allowed or denied in the
Class of Service (FBA/FBD) of the telephone.
Operating parameters
On incoming DID calls, Hunting takes precedence, followed by Call Waiting, then Call Forward
Busy. In busy situations, the call hunts if the telephone has Hunting specified.
 
Also if you need to forward/hunt to an outside number, you will need to set cfxa (call forward external allowed) in the sets cls.


Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
 
Hey guys thanks for the responses with all your input i am nearly there.

One issue I have though is I can't hunt on busy internally, now I have read about this somewhere and didn't believe it - but I can confirm it's true. However there must be a way round or a setting that I have missed - anyone have any ideas please - cheers
 
Thnaks for all responses I got it thanks OSI layer 8 problem (me and user).

Cheers again for assistance.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top