Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call forward no answer from i2002 Succession 3.0 don't work 1

Status
Not open for further replies.

gonzo99

Technical User
Nov 28, 2003
9
0
0
DE
I set up CFNA like described in NTP (Feature implementation 1).
Same procedure like on M1.

But it don't work. After 4 rings there is a short delay in ringing, but after that the i2002 keeps ringing.

Is there any known issue in Succession 3.0 ???

Any Ideas?
 
Have you got CLS "USRA" set up. This will cause a pause in the ringing after X amount of rings. Another suggestion is to set up CFNA to another Internet telephone.
See if that works, as you may have to make changes to your ITG / Sig Server etc settings.

All the best

Firebird Scrambler
Meridian Programmer in the UK
 
>Have you got CLS "USRA" set up.
I'm not sure, will take a look when on site today.

Another try to descibe the behavior:
After the 1st 4 rings comes a nearly unhearable "higs" and continue ringing. It's like the Succession tries to forward the call but can't and the call comes back to the source Phone. Source an destination Phones are i2002.
 
Is it trying to forward to an external number? If so, check that CFXA is set and not CFXD.

Jerry
 
can you print out the tn

OLD ROLMEN WORKING ON NORTELS
 
Here is the printout:
REQ: prt
TYPE: i2002
TN 62 10
DATE
PAGE
DES

DES 061000
TN 062 0 00 10 VIRTUAL
TYPE I2002
CDEN 8D
CUST 0
ZONE 001
FDN 418
TGAR 1
LDN NO
NCOS 4
SGRP 0
RNPG 0
SCI 0
SSU
LNRS 16
XLST
SFLT NO
CAC_MFC 0
CLS TLD FBA WTA LPR MTD FNA HTD ADD HFA CRPD
MWD LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTA SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUD DPUD DNDA CFXA ARHD CLTD ASCD
ABDD CFHD FICD NAID BUZZ
UDI RCC HBTD AHD IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRA ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD VOLA VOUA
CPND_LANG ROM
RCO 0
EFD
HUNT
EHT
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 450 0 MARP
01 ADL 16
02 ADL 16
03 ADL 16
04
05
06
07
08
09
10
11
12
13
14
15
16
17 TRN
18 AO6
19 CFW 16
20 RGA
21 PRK
22 RNP
23
24
25
26
27
28
29
30
31
 
LOOKS LIKE IT SHOULD FORWARD INTERNAL BUT NOT EXTERNAL THERE IS NO FORWARD TARGET ON EFD

OLD ROLMEN WORKING ON NORTELS
 
That's it!

Sometimes I'm a blind man.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top